New brakes are 'rubbing'.....
New brakes are 'rubbing'.....
Author
Discussion

oskypuss

Original Poster:

10 posts

267 months

Monday 25th September 2006
quotequote all
Hi everyone,

I had some new front discs and pads fitted by a mate (who does know what he's doing!) a couple of months back; they're turbospeed with Mintex pads.

When I brake, they make a very loud rubbing/hissing noise...and my old ones (that were standard) didn't. Is this normal?!

Also, the fornt left makes a slight rubbing noise even when I'm not using the brakes. It stops when I touch the brakes VERY gently, but then returns again when I brake harder.

The brakes seem to be working absolutely fine, so I'm puzzled. Can anyone offer an explanation or help?!

Thanks very much.

gooby

9,269 posts

265 months

Monday 25th September 2006
quotequote all
uprated pads tend to make a little noise. Had he forgotten the "antisqueal" shims?

oskypuss

Original Poster:

10 posts

267 months

Monday 25th September 2006
quotequote all
No, the shims are on!

It's just baffling that it's mainly coming from one side, which suggests something's not quite right, though there's nothing immediately obvious...

kevin ritson

3,423 posts

258 months

Monday 25th September 2006
quotequote all
Turbogrooves have grooves in them (strangely enough!) that make a hissing sound when braking, it's perfectly normal, just unusual after a solid/cross drilled setup.

As for rubbing when not braking, my rears did this when I put them on last week but put this down to old discs (the locating nut wouldn't come off and the pad was rubbing against the ridges). New discs went on Saturday so I'm giving them 200 miles to bed in, then see if it still happens.