intermitant squeek
Author
Discussion

///M-power

Original Poster:

722 posts

258 months

Wednesday 4th October 2006
quotequote all
..just started to develop said squeek when pulling away from standing start or rolling in 2nd. Not all the time and coming from the back drivers side somewhere.

Loose heat shield, exhaust?? Ideas?

Doesn't always happen, only when I get a bit of vibration thru the car ie. releasing clutch without enough revs. Pulling away in a high gear at too low a speed.

Glutch feels strong and car rides fine. Just wonder if the stage 2 racket has worked something loose? Will try to take a look underneath at the weekend.

Car is an 04 Exige S2

L100NYY

36,851 posts

274 months

Thursday 5th October 2006
quotequote all
Is it definitley from the rear of the car? It's just that the hardtops can be prone to squeaking and just need a quick re-adjustment?

MiniDiva

1,227 posts

252 months

Thursday 5th October 2006
quotequote all
Hi ///M

I have a 54 plate S2 Exige and had exactly the same a little while ago.

My service centre looked at it and found it to be the alternator belt. Under not-enough revs it was 'chirping' - I don't think it was slipping, but vibrating (in the pulley maybe?). There should be an automatic tensioner on there to stop it vibrating which they checked and it was fine.
They tried spraying on some belt dressing to stop the noise, but I then it ended up with a wooshing sound when when Idling - It sounded like a steam train - I was very embarrased by it!paperbag

Anyway, the SC were going to change it under warranty as they though it had 'uncharacteristic properties', but then I got told than no sorry they wouldn't after all as the guy from Lotus poo-pooed it! Anyway, after a bit of kicking and screaming argue they changed it for me and it solved the problem, although occasionally I still get the odd squeek - no where near what it was like before though!
The belt is ridiculously expensive - £50 or something stupid, so try some of the belt dressing - and make sure you get even coverage. I think the problem with mine could've been that only a small section of the belt had it on.
Don't know where you'd buy it from though - a general motor factor might have it.

I wonder if it is becoming a common problem? Or maybe we're just unique..or duonique....??silly

Mini.

Edited by MiniDiva on Thursday 5th October 17:43

gooby

9,269 posts

265 months

Thursday 5th October 2006
quotequote all
For belt dressing try rubbing a candle on the belt for a brief second. Old trick taught to me by a very rare man. A vehicle engineer not a mechanic.

///M-power

Original Poster:

722 posts

258 months

Thursday 5th October 2006
quotequote all
Thanks for the replies. MiniDiva, now you say it a "chirp" is exactly what it sounds like and it is only when not enough revs are applied. Gooby where am I looking, not had my head under the bonnet in ernest and are you serious about the candle trick, if so I'll give it a go to see if it highlights the belt as the problem. Any more details, directions would be great.

Ben tis not the roof chap. My limited technical skills tell me that much. Anyway my squeeky roof sound comes from a different part of the car to this "chirp". Its definitely coming from behind me in the engine bay on the right hand side.

Thanks again for the replies.






Edited by ///M-power on Thursday 5th October 22:16