S2 cat bypass
Author
Discussion

mrtoad

Original Poster:

117 posts

243 months

Tuesday 10th October 2006
quotequote all
I am keen to remove the cat from my standard Elise S2. I have seen a couple of items on eliseparts.com and would very much appreciate some advice on whether the solid or flexi bypass pipe is best. Also, how easy are they to fit?

mrtoad

Original Poster:

117 posts

243 months

Wednesday 11th October 2006
quotequote all
Can anyone help with this? I have tried to search the forum but only the Google search is fuctioning at present and it isn't finding anything useful.

shangani

3,069 posts

268 months

Wednesday 11th October 2006
quotequote all
The flexi bit is on the manifold on an S2, not the cat. You just need a cat release pipe ~£60 or less. The flexi sectioned CRP's are for those using solid manifolds.

You are looking for something like this: www.eliseparts.com/shop/index.php?main_page=product_info&cPath=118&products_id=396

Next question is why?:

1) Your car will be a lot louder
2) On a VVC the power will drop and on a standard engine will not increase by any perceptible level
3) Your car will be illegal
4) You will have to refit the cat at every MoT - no, it isn't that hard, unless the bolts are rusted solid, in which case you will need an angle grinder.



Edited by shangani on Wednesday 11th October 10:43

mrtoad

Original Poster:

117 posts

243 months

Wednesday 11th October 2006
quotequote all
Thank you for the advice Shanghi. The part you're suggesting is for the S1 Elise. Mine is an S2 and Eliseparts do a flexi cat bypass pipe supposedly with the aim of reducing ware to the exhaust system.

The reason for de-catting the car is to release more power as stated on the Eliseparts site and also to get more pops and bangs from the exhaust. As for MOT's, if the cat is easy to re-fit I don't mind doing this once a year.

Dream Machines we selling a de-catted Sport 160, I think it now belongs to Toxic Frog, and it sounded lovely.

Hollywood Wheels

3,689 posts

261 months

Wednesday 11th October 2006
quotequote all

Worth doing I think. Get a second-hand one from e-bay for £10, it's just a metal pipe after all.

To be honest, I wouldn't hold out any hope of it sounding like Toxic Frogs 160, they have a very 'unique' sound (as my neighbours will testify!!!!evil) because of the actual engine.

It will sound better though, so give it a go...

bogie

17,109 posts

303 months

Wednesday 11th October 2006
quotequote all
complete waste of time IMO - its not until you are at 180bhp + that you will need to fit one and even then its only a couple of bhp that you cant notice ....lots of hassle just for noise...you can get more noise without the inconvenience/being illegal if you get a louder back box

some people have fitted them and actually lost power.....

mahju

407 posts

242 months

Wednesday 11th October 2006
quotequote all
mrtoad said:
I am keen to remove the cat from my standard Elise S2.


I think Gobby might be able to help you http://pistonheads.com/gassing/topic.

hehe

mrtoad

Original Poster:

117 posts

243 months

Wednesday 11th October 2006
quotequote all
mahju said:
mrtoad said:
I am keen to remove the cat from my standard Elise S2.


I think Gobby might be able to help you http://pistonheads.com/gassing/topic.

hehe


Funnily enough Mahju, I quite like to remove that soft of cat as well. My girlfrien has two which like to sit on my car and use it to sharpen their claws. A common problem I think.

shangani

3,069 posts

268 months

Wednesday 11th October 2006
quotequote all
mrtoad said:
Thank you for the advice Shanghi. The part you're suggesting is for the S1 Elise. Mine is an S2 and Eliseparts do a flexi cat bypass pipe supposedly with the aim of reducing ware to the exhaust system.

The reason for de-catting the car is to release more power as stated on the Eliseparts site and also to get more pops and bangs from the exhaust. As for MOT's, if the cat is easy to re-fit I don't mind doing this once a year.

Dream Machines we selling a de-catted Sport 160, I think it now belongs to Toxic Frog, and it sounded lovely.


I did say "something like that". I was at work and didn't have a lot of time earlier.

The specific one is : www.eliseparts.com/shop/index.php?main_page=product_info&cPath=118&products_id=398

If you have a standard manifold, this already has a flexi section so you can just use a straight through pipe. The one with the flexi section is for solid manifolds. You can still use a solid system throughout, but then you would need a different bottom engine mount.

I still think they are a waste of time on a standard engine - you will not be able to feel any difference in power, other than that the noise may make you think you are going faster. If you want that much noise, get one of the ebay hong kong made exhausts and you can be at 110 dB at tickover. The standard S2 will still not sound like a 160.

rfoster

1,482 posts

285 months

Wednesday 11th October 2006
quotequote all
You can have mine for free if you like, It's coming off tomorrow as it just failed the MOT yesterday (have just ordered the cat for it). Can't be bothered to put it back on! I'm in Sussex too.

mrtoad

Original Poster:

117 posts

243 months

Thursday 12th October 2006
quotequote all
That very kind of you Rfoster. I live about ten miles north of Brighton.

mrtoad

Original Poster:

117 posts

243 months

Thursday 12th October 2006
quotequote all
shangani said:
mrtoad said:
Thank you for the advice Shanghi. The part you're suggesting is for the S1 Elise. Mine is an S2 and Eliseparts do a flexi cat bypass pipe supposedly with the aim of reducing ware to the exhaust system.

The reason for de-catting the car is to release more power as stated on the Eliseparts site and also to get more pops and bangs from the exhaust. As for MOT's, if the cat is easy to re-fit I don't mind doing this once a year.

Dream Machines we selling a de-catted Sport 160, I think it now belongs to Toxic Frog, and it sounded lovely.


I did say "something like that". I was at work and didn't have a lot of time earlier.

The specific one is : www.eliseparts.com/shop/index.php?main_page=product_info&cPath=118&products_id=398

If you have a standard manifold, this already has a flexi section so you can just use a straight through pipe. The one with the flexi section is for solid manifolds. You can still use a solid system throughout, but then you would need a different bottom engine mount.

I still think they are a waste of time on a standard engine - you will not be able to feel any difference in power, other than that the noise may make you think you are going faster. If you want that much noise, get one of the ebay hong kong made exhausts and you can be at 110 dB at tickover. The standard S2 will still not sound like a 160.


Thank you for the infomation Shangani and sorry I spelt you name wrong my last reply. I already have a Lotus stage 1 exhaust fitted and would like to upgrade to a Larini but until then a cat bypass seems like a cheap option to improve the note. I also intend to fit a Hurricane induction kit in the near future which I hope will also make a bit of a difference.

I suppose the obvious answer would have been to have bought a Sport 160 in the first place but I use my Elise every day and was lead to believe that an S160 would not be a wise choice.

shangani

3,069 posts

268 months

Thursday 12th October 2006
quotequote all
If you want to track the car, leave the cat on or you will fail the noise regs.

rfoster

1,482 posts

285 months

Thursday 12th October 2006
quotequote all
mrtoad said:
That very kind of you Rfoster. I live about ten miles north of Brighton.


Then I'm about 20 minutes north of you! (Felbridge on the way to E.G.)

mrtoad

Original Poster:

117 posts

243 months

Thursday 12th October 2006
quotequote all
rfoster said:
mrtoad said:
That very kind of you Rfoster. I live about ten miles north of Brighton.


Then I'm about 20 minutes north of you! (Felbridge on the way to E.G.)


If it is convenient with you perhaps I can head over your way on Saturday afternoon and meet at a local pub such as the Wire Mill. We could even arrange a bit of a country lane bast with others from this forum.

rfoster

1,482 posts

285 months

Thursday 12th October 2006
quotequote all
Sure thing - I just need to wait until the cat turns up at the garage so they can fit it and then you can pop up!

MJK 24

5,680 posts

267 months

Thursday 12th October 2006
quotequote all
I must say I run with a cat replacement pipe on my standard S2 and have noticed a slight difference in performance.

There's a little less low down torque and a little more top end power. It revs sweetly to 6,500 whereas before, it'd start making a meal out of it at 6,150ish.

MPG is much improved. An extra 3mpg when crusing on the motorway.

It it a lot louder when accelerating. Constant throttle, I'd say it's about 10-15% louder.

Different strokes for different folks but I wouldn't be without mine. I can see why many people wouldn't touch one with a barge pole.

mrtoad

Original Poster:

117 posts

243 months

Friday 13th October 2006
quotequote all
Hi Rfoster,

Have you managed to get your cat fitted yet? Still very interested in your de-cat pipe if the offer still stands.

Regards,

Guy

rfoster

1,482 posts

285 months

Friday 13th October 2006
quotequote all
Yes you can certainly have it but it's not being fitted until Monday now! Drop me an email with your email address and I'll let you know when it's ready. My email is richard@meridian-finance.co.uk (no more porn please S Works)