rear grills
Author
Discussion

carlymart

Original Poster:

618 posts

245 months

Sunday 25th March 2007
quotequote all
i need to refubish the rear grills off my s2
but i am having problams removing them
it looks like their is a screw and a bolt holding them in place
the bolt has come out no problam but the screw in both just keeps turning
has any one removed these and was it just a normal screw ir somthing much more sinister
thanks in advance

Hollywood Wheels

3,689 posts

261 months

Sunday 25th March 2007
quotequote all
Just lever them out (carefully!) with a screwdriver, they'll pop out easily. One is enough to hold the grills in place if you happen to break the other. A wire-brush will sort out any corrosion, then some hammerite, jobs a good 'un. Or ditch them altogether like I have.

S works

10,166 posts

281 months

Sunday 25th March 2007
quotequote all
It's an S2 dude - if we're talking about the ones on the engine lid (I think) they are just clipped into place with a plastic jobbie. Open the bootlid and see the fixings from underneath.

Hollywood Wheels

3,689 posts

261 months

Sunday 25th March 2007
quotequote all
Doh! banghead

S works

10,166 posts

281 months

Sunday 25th March 2007
quotequote all
Hollywood Wheels said:
Doh! banghead

But then come to think of it, the post could refer to the exhaust grills... in which case I think you're about right.

carlymart

Original Poster:

618 posts

245 months

Sunday 25th March 2007
quotequote all
S works said:
Hollywood Wheels said:
Doh! banghead

But then come to think of it, the post could refer to the exhaust grills... in which case I think you're about right.
yep the exhaust grills
sorry should have been a little more accurate
also was wondering about running the car without them all together

S works

10,166 posts

281 months

Sunday 25th March 2007
quotequote all
I have the H111 blanking kit, 2bular also have one I think. On the Honda's it helps with cooling as the manifold does create a lot of heat at the back.

shay2nak

14 posts

245 months

Monday 9th April 2007
quotequote all
Love the STUSSY sticker!

Aren't the rear grills also held in place by rivets? I've got an Exige S and want to install an exhaust that will exit from that section. I don't want to leave the whole rear bare.