Can the original Konis (S1) get new springs fitted?
Can the original Konis (S1) get new springs fitted?
Author
Discussion

jondude

Original Poster:

2,441 posts

248 months

Thursday 5th April 2007
quotequote all
I've inspected my Konis and while the dampers are fine, the springs look very rusty.

I appreciate earlier advice on the S2 suspension upgrade, but would like to be sure I cannot fit new springs to the Konis before I trash them?

jeffers_elises1

66 posts

247 months

Thursday 5th April 2007
quotequote all
you can but id get s2 suspension. i paid £80 iirc for one rear spring for a koni

tricky 100

954 posts

273 months

Thursday 5th April 2007
quotequote all
Didn't think you could take the springs off the original konis (Red ones ) as they dont have adjustable platforms. Get a S2 kit , much better .

Sam_68

9,939 posts

276 months

Thursday 5th April 2007
quotequote all
I don't have a set of Konis in front of me, but you'll usually find that one of the (non-adjustable) spring seats has a slot in it and can be removed by compressing the spring, then sliding it out sideways over the rod of the damper.

jondude

Original Poster:

2,441 posts

248 months

Thursday 5th April 2007
quotequote all
Thanks for above.

Must admit, at £80 a spring it does make more sense to get the S2 kit.

Appreciate the help.

cinqster

1,057 posts

310 months

Thursday 5th April 2007
quotequote all
Sam_68 said:
I don't have a set of Konis in front of me, but you'll usually find that one of the (non-adjustable) spring seats has a slot in it and can be removed by compressing the spring, then sliding it out sideways over the rod of the damper.


Yep

jondude

Original Poster:

2,441 posts

248 months

Thursday 5th April 2007
quotequote all
Does make sense as I'm sure the Koni motorcycle range was famed for being easily re-buildable.