Alternator Woes!!
Discussion
Hi Bought a Series 1 elise a few weeks ago 1998 1.8 and couple of days ago the alt started squaling really badly on start up..Took it to my local dealer and they have diagnosed a snapped adjuster bolt into the engine....They have quoted that it could be an engine out job to fix ££££££££££££!! Anyone had any experience of this problem...
On the brightside took it out yesterday with the roof off and had much fun dusting a TT!!
On the brightside took it out yesterday with the roof off and had much fun dusting a TT!!
That's rubbish - the adjuster bolt is on a bracket & doesn't go into the engine, you can take the whole bracket off with the engine in situ. The only bolts that go into the engine are for the main Alternator mounting bracket which isn't adjustable & has three bolts holding it in - which incidentally can also be removed with the engine in place
Edited by junks on Sunday 8th April 23:10
They said its the bolt that holds the bracket to the engine thats snapped off, and need to lower the engine to get the remains of the bolt out...They presented me with a large gold cylindrical spacer to keep hold of until it goes in on Wednesday. I can see the top bolt is ok, the large one that pinches the alternator to the casting on the engine block.
Anyone know a good idependant in the Derby area I can get to take a look?
Anyone know a good idependant in the Derby area I can get to take a look?
stumason10 said:
They said its the bolt that holds the bracket to the engine thats snapped off, and need to lower the engine to get the remains of the bolt out...They presented me with a large gold cylindrical spacer to keep hold of until it goes in on Wednesday. I can see the top bolt is ok, the large one that pinches the alternator to the casting on the engine block.
Anyone know a good idependant in the Derby area I can get to take a look?
Anyone know a good idependant in the Derby area I can get to take a look?
Just realised which bit they mean (bolt No 11, sleeve arrowed) - still think it's possible without removing the engine though
Edited by junks on Monday 9th April 09:48
Edited by junks on Monday 9th April 09:49
Ah that helps!!
Yes bolt 11 has snapped in the engine...they say, that to get access they will need to lower the engine to get access to tap it out as the shank has snapped off. Had a look yesterday and that area is right up against the chassis leg, so might be right what they're saying.. Just sounds like a bundle of labour costs though.
I am using the car as a daily driver so need it to be reliable and the missus lives miles away in kent, so don't fancy being stranded en route!! lol!
Yes bolt 11 has snapped in the engine...they say, that to get access they will need to lower the engine to get access to tap it out as the shank has snapped off. Had a look yesterday and that area is right up against the chassis leg, so might be right what they're saying.. Just sounds like a bundle of labour costs though.
I am using the car as a daily driver so need it to be reliable and the missus lives miles away in kent, so don't fancy being stranded en route!! lol!
stumason10 said:
Ah that helps!!
Yes bolt 11 has snapped in the engine...they say, that to get access they will need to lower the engine to get access to tap it out as the shank has snapped off. Had a look yesterday and that area is right up against the chassis leg, so might be right what they're saying.. Just sounds like a bundle of labour costs though.
I am using the car as a daily driver so need it to be reliable and the missus lives miles away in kent, so don't fancy being stranded en route!! lol!
Yes bolt 11 has snapped in the engine...they say, that to get access they will need to lower the engine to get access to tap it out as the shank has snapped off. Had a look yesterday and that area is right up against the chassis leg, so might be right what they're saying.. Just sounds like a bundle of labour costs though.
I am using the car as a daily driver so need it to be reliable and the missus lives miles away in kent, so don't fancy being stranded en route!! lol!
There's nothing poking out of the engine at all then?? Once the head has snapped off it should release the pressure allowing the rest of the bolt to come out fairly easily - if there is anything sticking out you may be able to get a pair of moles on it
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


