Coolant leak from radiator bleed valve...
Discussion
My Elise S2 is leaking a small amount of coolant from the radiator bleed valve. I have been told by the garage that they make be able to get to the valve by removing the indicator lense, but if not it's a clam off job. Anyone else had experience of this? Obviously I'm keen to avoid the cost of clam removal if it is not really necessary. Hoses and clips can fail at any time so surely Lotus designed the car with this in mind.
I have this now (although on a VX220).
It seems to be thread on the inside of the hose that the screw in valve doesn't take to.
As a quick fix, i used a small jubille clip around the part of the hose that contains the valve. Tighten this clip so that it grips the part of the fixing inside the hose, then tighten the nipple valve back in then tighten the jubilee clip. The jubilee clip stops the fixing inside the hose moving, allowing the top of the valve to grip and screw back in.
I have spoken to plans and they said it's an hour and half job. According the the Vauxhall TIS cd, you don't have to remove the clam (although some people have told me that it's a pita with the clam on).
HTH
Chris
It seems to be thread on the inside of the hose that the screw in valve doesn't take to.
As a quick fix, i used a small jubille clip around the part of the hose that contains the valve. Tighten this clip so that it grips the part of the fixing inside the hose, then tighten the nipple valve back in then tighten the jubilee clip. The jubilee clip stops the fixing inside the hose moving, allowing the top of the valve to grip and screw back in.
I have spoken to plans and they said it's an hour and half job. According the the Vauxhall TIS cd, you don't have to remove the clam (although some people have told me that it's a pita with the clam on).
HTH
Chris
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


