S2 wheels, are rover and toyota engined cars the same offset
Discussion
No they aren't - the k engined cars need a spacer at the rear to create the same offset - ie to use 111r or S2 exige wheels. 20mm iirc and available through eliseparts..
Offset is 38 on the yota wheels and 18 on the k series S2. Hence the 20mm spacer required on the k series cars using yota wheels. PCD is 100mm for both.
Offset is 38 on the yota wheels and 18 on the k series S2. Hence the 20mm spacer required on the k series cars using yota wheels. PCD is 100mm for both.
Edited by shangani on Friday 20th April 09:12
Yes they are. Offset 31 vs 31.5, so good enough.
For future info, there is a great Wiki on Seloc:
http://wiki.seloc.org/a/S2_Wheel_Opti
For future info, there is a great Wiki on Seloc:
http://wiki.seloc.org/a/S2_Wheel_Opti
Edited by shangani on Friday 20th April 09:52
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


