Squeaky Brakes, Driving Me Crazy!
Squeaky Brakes, Driving Me Crazy!
Author
Discussion

BullFace

Original Poster:

90 posts

235 months

Monday 23rd April 2007
quotequote all
Hi All

The breaks on my S1 squeak all the time and I think it's getting louder. I took it to Bell & Colvill service department and was told this is normal. He didn’t even look/drive/hear the car so how he could tell, maybe he had his crystal ball under the counter. Does anyone else suffer with this problem and is there a fix?

Thanks

Hollywood Wheels

3,689 posts

261 months

Monday 23rd April 2007
quotequote all
What set-up are you running Peter? Standard discs and pads shouldn't squeel much, but some aftermarket set-ups squeel a lot....

BullFace

Original Poster:

90 posts

235 months

Monday 23rd April 2007
quotequote all
I have no idea sorry, only had the car 3 weeks now. Ho do I find out?

Hollywood Wheels

3,689 posts

261 months

Monday 23rd April 2007
quotequote all
You probably won't know just by looking at them in that case. Do the pads look like they have life left in them, if they were on the way out I'd expect to hear grinding rather than squeeling, but you never know? Just take it out for a few high speed runs. Find a nice straight bit of road, bring it up to about 70+, then HARD braking to about 10-20. Do this a few times, it should help. Before doing this it might be worth just spraying some halfords brake cleaner liberally around the caliper and pad..........just be careful for the first few applications of the brakes after that! Copper grease around the rear of the pad will also help, but hopefully a few high speed stops will sort it....

cyberface

12,214 posts

288 months

Monday 23rd April 2007
quotequote all
Hard race pads like the Pagids will squeal pretty much in all cases unless very carefully bedded in. You shouldn't get squeal from standard pads or things like Greenstuff.

Normally the pads come with 'anti-squeal shims' which are placed behind the pad and prevent the high-frequency vibrations you hear as squeal. Copperslip behind the pads is a less reliable solution but an alternative, as pointed out.

Perhaps whoever fitted your pads didn't fit the anti-squeal shims, or you've got particularly lairy pads in there, or they weren't bedded in correctly when initially fitted.

Even mid-spec pads like Mintex 1144 can squeal if not bedded in properly. Your only recourse may be to get the pads replaced, anti-squeal shims fitted, and then bed the pads in exactly as instructed by the pad manufacturer.

greysquirrel

786 posts

258 months

Monday 23rd April 2007
quotequote all
pads were fine for ages, but i had the eliseparts squeal pads on. recently the front left is squeaking like a bitch and i cant stop it! really annoying me!

missdiane

13,994 posts

280 months

Monday 23rd April 2007
quotequote all
Ours squeak all the time, had them checked and was told they are fine