Anyone used quick release service panel bolts?
Discussion
Afternoon all
Quick question, has anybody ever used these...
http://tinyurl.com/ytq5ey
Are they any good and are they easy to fit? A dealer (that will remain nameless) rounded off 3 of my 6 bolts (i was NOT happy but found out a couple of months after car had been with them so was in no position to point it out to them)...anyway, an excuse for the quick release ones so that I can clean a lot easier
Any thoughts?
Cheers chaps
Me
Quick question, has anybody ever used these...
http://tinyurl.com/ytq5ey
Are they any good and are they easy to fit? A dealer (that will remain nameless) rounded off 3 of my 6 bolts (i was NOT happy but found out a couple of months after car had been with them so was in no position to point it out to them)...anyway, an excuse for the quick release ones so that I can clean a lot easier
Any thoughts?
Cheers chaps
Me
benmac said:
Yep, doddle to fit and make taking the panels off so much easier. bear in mind that the outermost one has to stay as a threaded insert so its not QR on all of them. Still, overall its lots quicker.
Agreed. A bit pricey for what it is Tony but worthwhile keeping the ones you don't need in the boot as spares. You WILL drop one down inside the front again at some point. You just know it

TonyHetherington said:
Afternoon all
Quick question, has anybody ever used these...
http://tinyurl.com/ytq5ey
Are they any good and are they easy to fit? A dealer (that will remain nameless) rounded off 3 of my 6 bolts (i was NOT happy but found out a couple of months after car had been with them so was in no position to point it out to them)...anyway, an excuse for the quick release ones so that I can clean a lot easier
Any thoughts?
Cheers chaps
Me
Quick question, has anybody ever used these...
http://tinyurl.com/ytq5ey
Are they any good and are they easy to fit? A dealer (that will remain nameless) rounded off 3 of my 6 bolts (i was NOT happy but found out a couple of months after car had been with them so was in no position to point it out to them)...anyway, an excuse for the quick release ones so that I can clean a lot easier
Any thoughts?
Cheers chaps
Me
I had these on my 135R. I got so fed up with them coming loose that I went back to the fixed ones. The need to remove the panels is pretty rare, so I didn't really see it as a problem. The covers never actually came off, but they were certainly flopping around.
So, is it really necessary to have quick release on a panel that's rarely opened?
Nigel
These are very similar to the Dzus fasteners I use on my race bike. Before I started taping over them, I would typically lose a couple at each trackday. If the backing plate is properly adjusted (bent) and the fastener length is spot on, they are fine, otherwise I would give them a miss unless you take the panels off very regularly. People like Demon Tweaks do a range of similar fasteners with D Ring and slotted heads which might be worth a look.
nigelayres said:
TonyHetherington said:
Afternoon all
Quick question, has anybody ever used these...
http://tinyurl.com/ytq5ey
Are they any good and are they easy to fit? A dealer (that will remain nameless) rounded off 3 of my 6 bolts (i was NOT happy but found out a couple of months after car had been with them so was in no position to point it out to them)...anyway, an excuse for the quick release ones so that I can clean a lot easier
Any thoughts?
Cheers chaps
Me
Quick question, has anybody ever used these...
http://tinyurl.com/ytq5ey
Are they any good and are they easy to fit? A dealer (that will remain nameless) rounded off 3 of my 6 bolts (i was NOT happy but found out a couple of months after car had been with them so was in no position to point it out to them)...anyway, an excuse for the quick release ones so that I can clean a lot easier
Any thoughts?
Cheers chaps
Me
I had these on my 135R. I got so fed up with them coming loose that I went back to the fixed ones. The need to remove the panels is pretty rare, so I didn't really see it as a problem. The covers never actually came off, but they were certainly flopping around.
So, is it really necessary to have quick release on a panel that's rarely opened?
Nigel
Depends if your washer bottle is in the front. The 135R was one of the first S2s to move it to the engine bay I think, so after it moved they become less advantageous.
Thanks for the opinions, guys!
I don't take them off THAT much - especially as I have no service items under there (non washer bottle or anything like that!) - it was mainly just because I had rounded off bolts.
Ok next question then; where can I get a replacement set of bolts? Or is it just a Lotus jobbie?
Thanks people!
I don't take them off THAT much - especially as I have no service items under there (non washer bottle or anything like that!) - it was mainly just because I had rounded off bolts.
Ok next question then; where can I get a replacement set of bolts? Or is it just a Lotus jobbie?
Thanks people!
TonyHetherington said:
Thanks for the opinions, guys!
I don't take them off THAT much - especially as I have no service items under there (non washer bottle or anything like that!) - it was mainly just because I had rounded off bolts.
Ok next question then; where can I get a replacement set of bolts? Or is it just a Lotus jobbie?
Thanks people!
I don't take them off THAT much - especially as I have no service items under there (non washer bottle or anything like that!) - it was mainly just because I had rounded off bolts.
Ok next question then; where can I get a replacement set of bolts? Or is it just a Lotus jobbie?
Thanks people!
In which case deffo don't replace Tony. Just not worth it IMO. I imagine the regular spots will be able to get you replacements. Failing that, call Lipscombs.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


