Newbie's electrical gremlin - S2 head unit prob
Newbie's electrical gremlin - S2 head unit prob
Author
Discussion

winslowarizona

Original Poster:

2 posts

235 months

Tuesday 24th April 2007
quotequote all
Hi, I hope someone can help! Long time reader - first time poster!

I bought a 2001 S2 last September and installed a new Sony head unit just after christmas, removing an old Kenwood head.

Everything seemed ok but when driving the car sometimes the stack instrument light would flicker on and off for no reason. After a bit of button pushing and turning things off and on it would seem that my new head unit is making this happen in some way.

Also (I only noticed this in the dark) when I turn the head unit on the switch light on the sidelight switch starts to glow a bit...wierd.

Any suggestions for a fix, other than take it to a dealer (the only one up here is MMC and I'll be four-exxed if I'm going to them)?

Ta for any suggestions y'all can give.

ROB1979

221 posts

236 months

Wednesday 25th April 2007
quotequote all
First thing to do is buy an elise workshop manual (ebay) which will have all the wiring diagrams in it, at least that will aid you in the task.
Sounds to me like an earthing problem. They probably share a common ground so that's the best place to start (use dia' to locate).
Also, when i changed my head unit i found a crushed section of the loom behind the dash which had rubbed through on the chassis, luckily it wasn't causing a problem but it's worth checking you hadn't crushed a wire when you put the unit back in.
My only other suggestion is to substitute the head unit for another just to check that it's not back feeding up a wire, i mean it's possible if it didn't do it with the Kenwood head unit in there.
Hope that all helps and hopefully someone with real know how will be along soon!

planty67

27 posts

236 months

Wednesday 25th April 2007
quotequote all
ROB1979 said:
Also, when i changed my head unit i found a crushed section of the loom behind the dash which had rubbed through on the chassis, luckily it wasn't causing a problem but it's worth checking you hadn't crushed a wire when you put the unit back in.

What ROB1979 says above. I had a similar problem on a previous car (not a Liz) where wires coming out of the loom had been crushed and the insulation rubbed away causing weird effects on the stack and an interior light to stay on permanently (even when I took the fuse out). Freeing the wires and reinsulating them sorted it.

winslowarizona

Original Poster:

2 posts

235 months

Wednesday 25th April 2007
quotequote all
Thanks, I'll try the suggestions.

It's so difficult trying to fit all the wires in behind the head unit that the crushed wire thing sounds very reasonable. I'll check it.

I've got a workshop manual, but reading wiring diagrams isn't really my forte!

Thanks for the advice.