Bobbling binnacle
Discussion
Anyone elses binnacle cover lifting? I can only describe the alcantara as "sagging" in middle and lifting in 3 big ripples down the sides.
Is interior trim covered by warranty or is it an excuse to buy a carbon one? Of course once you do that you have to get the matching steering column cowl and centre console or it would look silly.
Is interior trim covered by warranty or is it an excuse to buy a carbon one? Of course once you do that you have to get the matching steering column cowl and centre console or it would look silly.

My upper binnacle is lifting slightly on the left hand edge, but I think this was down to the need for an entirely new speedo in response to a dodgy original unit.
I thought the lifting was partly in response to TADTS dodgy build quality - I've managed to push the binnacle down so its flush with the lower binnacle. Not really a nuisance as yet, just a minor niggle. Also, no issue with squeaks or rattles so far, touch wood!
I thought the lifting was partly in response to TADTS dodgy build quality - I've managed to push the binnacle down so its flush with the lower binnacle. Not really a nuisance as yet, just a minor niggle. Also, no issue with squeaks or rattles so far, touch wood!
sequential said:
My upper binnacle is lifting slightly on the left hand edge, but I think this was down to the need for an entirely new speedo in response to a dodgy original unit.
I thought the lifting was partly in response to TADTS dodgy build quality - I've managed to push the binnacle down so its flush with the lower binnacle. Not really a nuisance as yet, just a minor niggle. Also, no issue with squeaks or rattles so far, touch wood!
I thought the lifting was partly in response to TADTS dodgy build quality - I've managed to push the binnacle down so its flush with the lower binnacle. Not really a nuisance as yet, just a minor niggle. Also, no issue with squeaks or rattles so far, touch wood!
This is just the alcantara lifting. I had the whole thing apart today with the intention of re-fixing the alcantara. Unfortunately the bits that are stuck are welded on and there's no chance of peeling it back and applying evostick or the like.
Squeaks and rattles I just assume are all the other bits

Tony - I have heard of someone using a syringe with glue in to pierce the air-bubble and get new glue under the lifted area. Sounds good in theory but how well it works and quite how you stop any excess glue coming back through the pin-hole and spoiling the Alcantara at that point I'm not so sure..?
I don't know the solution Tony, but I do want to award you the "(relative) newbie forum incessant fiddler award".
You're great. You've only had it a few weeks (so it seems) and you're already disassembling it and thinking of a million ways to throw money at it.
A man after my own heart.
You're great. You've only had it a few weeks (so it seems) and you're already disassembling it and thinking of a million ways to throw money at it.
A man after my own heart.
S works said:
I don't know the solution Tony, but I do want to award you the "(relative) newbie forum incessant fiddler award".
You're great. You've only had it a few weeks (so it seems) and you're already disassembling it and thinking of a million ways to throw money at it.
A man after my own heart.
You're great. You've only had it a few weeks (so it seems) and you're already disassembling it and thinking of a million ways to throw money at it.
A man after my own heart.

Seconded

Janitor said:
S works said:
I don't know the solution Tony, but I do want to award you the "(relative) newbie forum incessant fiddler award".
You're great. You've only had it a few weeks (so it seems) and you're already disassembling it and thinking of a million ways to throw money at it.
A man after my own heart.
You're great. You've only had it a few weeks (so it seems) and you're already disassembling it and thinking of a million ways to throw money at it.
A man after my own heart.

Seconded

Well, you know about the porter cable and the brakes and changing the rear lamps to LEDs but did I mention...
I painted the disc bells to match the wheels last week while I was changing the pads. Or that I now have bright red cam covers and replaced the rusty cover bolts with nice new shiny stainless steel ones? Or that I've got a the stainless fixing kit ready to order and I've ordered the walshy DVD (while I wait for a date). How about the fact I've also asked Specialised Paintwork to quote for some proper stripes. Oh, and the rest of my LEDs should be here today with any luck so that will keep me busy this afternoon.
Not even started to think about the carbon interior yet or ICE or an ECU flash. Second set of wheels with winter tyres, braided hoses...
Of course the car came with ITG Maxogen, a removable MOMO wheel, fire extinguisher, armourfend and a stage 1 exhaust. Still debating a change of exhaust but I think a decat pipe will on order very soon.
Knew I should have bought a f*cking Porsche!
Edited by 21TonyK on Thursday 26th April 07:55
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


