More legroom required.
More legroom required.
Author
Discussion

sigmamark

Original Poster:

25 posts

235 months

Sunday 29th April 2007
quotequote all
At 6'4", I am finding that unless I have the accelerator constantly on the floor I catch my right hand on my knee when taking tight righthanders in my wifes 05 111R! I reckon if I could find an extra inch (every mans dream), by moving the pedals or pedal box, life would be much easier. Anybody know if there is a simple fix?

Janitor

2,372 posts

250 months

Sunday 29th April 2007
quotequote all
Dunno about the pedal box fella, but perhaps a spacer boss type thing for the steering wheel to produce the extra inch of clearance..?

scam73

29 posts

236 months

Sunday 29th April 2007
quotequote all

i'm 6 foot 4 too, bought a snap off 280mm momo wheel from elise shop and its is a heap better.

S works

10,166 posts

281 months

Sunday 29th April 2007
quotequote all
As above, you can't move the pedals so the best option is to bring the wheel closer to you. Eliseparts.com and Elise-shop.com both offer the parts and wheels you need.

simonk

908 posts

256 months

Sunday 29th April 2007
quotequote all
Can this be done with existing steering wheel or do you have to have a new one?

shangani

3,069 posts

268 months

Sunday 29th April 2007
quotequote all
simonk said:
Can this be done with existing steering wheel or do you have to have a new one?



Yes - you can space the existing steering wheel. Eliseshop has the bits iirc.

S works

10,166 posts

281 months

Sunday 29th April 2007
quotequote all
shangani said:
simonk said:
Can this be done with existing steering wheel or do you have to have a new one?



Yes - you can space the existing steering wheel. Eliseshop has the bits iirc.

...but why would you want to do that Simon when you have a wonderful excuse to buy some more unnecessary bling tat for the Exige rofl

subaqua

892 posts

243 months

Monday 30th April 2007
quotequote all
Tims right you know.... a nice momo suede one.... oooo... with a steering wheel centre marker too!

kambites

71,746 posts

252 months

Monday 30th April 2007
quotequote all
I have a similar problem (I'm only six foot but haven rather long spindly legs). How much harder is it to get in and out with the roof on with a 30mm spacer behind the steering wheel?

simonk

908 posts

256 months

Monday 30th April 2007
quotequote all
subaqua said:
Tims right you know.... a nice momo suede one.... oooo... with a steering wheel centre marker too!


P155 off you two

Andy T

468 posts

259 months

Monday 30th April 2007
quotequote all
shangani said:
simonk said:
Can this be done with existing steering wheel or do you have to have a new one?



Yes - you can space the existing steering wheel. Eliseshop has the bits iirc.



Are you sure you can space the existing wheel? I have a similar problem and on my old elise had to get an OMP adjustable steering column and new wheels/boss. I'd be very interested to know how you can space out the existing wheel?

drac

369 posts

254 months

Monday 30th April 2007
quotequote all
I'm 6'4 too and have done many things to "improve" my elise.cloud9

All require a little effort but the end result is a different car for us tall folk.
1-Remove the T-shaped pieces at the back of the seat rail and replace with washers. Gain 5-7mm
2-Alter the back of the seat brackets and possibly the seat rails. Gain another 5-7mm
3-Alter the position of the accelerator and brake pedal as per the Lotus service bulletin. Altering the up and down stop for the accelerator pedal(This may require you to make a new bracket to attach the throttle cable to the engine as you run out of adjustment range.)Gain 10mm
4-Add a 20 to 40mm extension behind the steering wheel to bring it closer to your chest. Free up knee room.
5-Place 3mm spacers between the steering column brackets and the steering colume which brings the steering wheel up about 10mm. (Credit to Uldis for this one.)

I'm not an engineer, but managed to do all of the above. smokin If you need further info i can help, PM me.

I used to hit my knees too but now i don't even touch them.

( Removing the sun visors and replacing the mirror with a smaller one improves the outlook considerably.)

Andy T

468 posts

259 months

Monday 30th April 2007
quotequote all
drac said:
I'm 6'4 too and have done many things to "improve" my elise.cloud9


4-Add a 20 to 40mm extension behind the steering wheel to bring it closer to your chest. Free up knee room.
5-Place 3mm spacers between the steering column brackets and the steering colume which brings the steering wheel up about 10mm. (Credit to Uldis for this one.)



Did you manage to do the extension to the original lotus steering wheel? If so how did you do it/where can I get the parts etc?

cheers!

kambites

71,746 posts

252 months

Monday 30th April 2007
quotequote all
Andy T said:

Did you manage to do the extension to the original lotus steering wheel? If so how did you do it/where can I get the parts etc?

cheers!


www.elise-shop.com/index.php?main_page=product_info&cPath=5&products_id=178&zenid=19a36b77d87be106e955a40d550690ab maybe?

drac

369 posts

254 months

Monday 30th April 2007
quotequote all
Yes i did.

I had 2 made( a 20mm and a 40mm) I use the smaller. Transfered it from my S2 to my 111R.
Here is a photo.


I can try and find the 40mm one to take pics off the car if it helps.


Edited by drac on Monday 30th April 12:15

Andy T

468 posts

259 months

Monday 30th April 2007
quotequote all
Outstanding!

Thats cool, I want one of those! I was under the impression that those ones from eliseparts were only for the aftermarket momo type wheel hubs? maybe that will work on a normal steering wheel then?

Is the one you made the same as the ones you can buy from eliseparts?

Cheers




Edited by Andy T on Monday 30th April 12:19

drac

369 posts

254 months

Monday 30th April 2007
quotequote all
No its not from eliseparts, i had it made. I'm in NZ and got a local machine shop to do it.

Its a flat doughnut of aluminum with bolt holes in the right place and longer bolts.

I dont now what the eliseparts one is like.


kambites

71,746 posts

252 months

Monday 30th April 2007
quotequote all
drac said:
No its not from eliseparts, i had it made. I'm in NZ and got a local machine shop to do it.

Its a flat doughnut of aluminum with bolt holes in the right place and longer bolts.

I dont now what the eliseparts one is like.




The elise-parts one looks much the same from the picture.

drac

369 posts

254 months

Monday 30th April 2007
quotequote all
The one i had made only had 4 holes but i don't see why it wouldn't work.

stevie111s

123 posts

266 months

Monday 30th April 2007
quotequote all
One possible solution to the leg/head room issue is to install the original (bogo) S1 120 seats. I know this sounds daft but they do have less padding so the seating is slightly lower and further back. I have these in my S1 Sport 160 (not by choice ... came with them) and quite like the additional leg room and lower position.

How I will get on with them on the trip to Carcasonne in South France is another matter ... still, there is time to put on a little more 'padding'!