2004 S2 Exige tacho pulse
Discussion
I'm fitting a datatools revlight so no relevant lotus info available and I'm getting conflicting info. But, have looked at the shift-i info which is wired pretty much identically.
Fitting instructions for the Shift-i suggest that there is no pulse to the S2 stack and that it's digital(?). My 2001- wiring diagram is near identical to the S1 and shows A4 as the pulse but physically A4 does not exist on my loom.
Am I right in thinking I need to take the signal from the first cylinder as per the shift-i info or if there a pulse I can pick up somewhere else. I believe if I pull the signal from the cylinder I'll get 1/4 of the pulses needed for the revlight to read correctly.
Any info appreciated!
Fitting instructions for the Shift-i suggest that there is no pulse to the S2 stack and that it's digital(?). My 2001- wiring diagram is near identical to the S1 and shows A4 as the pulse but physically A4 does not exist on my loom.
Am I right in thinking I need to take the signal from the first cylinder as per the shift-i info or if there a pulse I can pick up somewhere else. I believe if I pull the signal from the cylinder I'll get 1/4 of the pulses needed for the revlight to read correctly.
Any info appreciated!
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


