Changing Brake Pads on S1
Discussion
Jon, don't fit EBC Greens, they don't work too well on the Elise. For similar money get Mintex 1144's - a far better pad for road use that also fair well on the occasional track outing.
I had EBC's on my Sport 160 for about a month and they were dreadful - binned them for the Mintex which were superb.
I had EBC's on my Sport 160 for about a month and they were dreadful - binned them for the Mintex which were superb.
As for changing them, absolutely Piece of P**s.... The fronts are about 40 minutes work for both sides and the rears are about the same. The rears, you need a pin punch to knock out the retaining pin from the inner (car inner) edge of the caliper, the hole is about 2mm dianter, stick a pin punch in and knock out the pin. You will need to use a piston retraction tool though to wind in the piston. Front is just an 'R' clip and pull out the retaining pin.... If you've done pads on anything else, the Elise is just as easy.
FWIW - I have Green stuff on the front of mine and standard Mintex on the rear, I think it brakes very well, although the feel is a little wooden, but performance wise it's just fine.... (Having said this, I won't go Green Stuff again, I'll try soemthing else)
FWIW - I have Green stuff on the front of mine and standard Mintex on the rear, I think it brakes very well, although the feel is a little wooden, but performance wise it's just fine.... (Having said this, I won't go Green Stuff again, I'll try soemthing else)
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


