Squeaking Noise
Discussion
Hi Dave,
I have a very similar sounding problem with my Elise, although it's more of a grinding/scraping sound. I'm not mechanically-minded so I did some searches the other week and was of the understanding that a faulty Clutch Release Bearing will ONLY make a noise when you put pressure on the clutch pedal - ie: to release the clutch. Maybe somebody could confirm/clarfiy this. The source I'm basing that on explained it as follows:
To check the clutch release bearing, start the engine. Rest your foot on the clutch and you may hear the bearing groaning, chattering or squealing. Fully depress the clutch and see if that induces the noise. The clutch release bearing is only under pressure when there is pressure on the clutch pedal. There will never be a noise when the clutch pedal is not touched. So if the noise is present when you are not touching the pedal, then its not the clutch bearing. If the release bearing needs replacing then its a gearbox out and clutch replacement job (not worth doing all that work and not replacing the complete clutch). Release bearing failure is sudden and immobilising.
Does this sound right? And if so can anyone suggest an alternative explanation to this problem?
I have a very similar sounding problem with my Elise, although it's more of a grinding/scraping sound. I'm not mechanically-minded so I did some searches the other week and was of the understanding that a faulty Clutch Release Bearing will ONLY make a noise when you put pressure on the clutch pedal - ie: to release the clutch. Maybe somebody could confirm/clarfiy this. The source I'm basing that on explained it as follows:
To check the clutch release bearing, start the engine. Rest your foot on the clutch and you may hear the bearing groaning, chattering or squealing. Fully depress the clutch and see if that induces the noise. The clutch release bearing is only under pressure when there is pressure on the clutch pedal. There will never be a noise when the clutch pedal is not touched. So if the noise is present when you are not touching the pedal, then its not the clutch bearing. If the release bearing needs replacing then its a gearbox out and clutch replacement job (not worth doing all that work and not replacing the complete clutch). Release bearing failure is sudden and immobilising.
Does this sound right? And if so can anyone suggest an alternative explanation to this problem?
According to the copy of "Lotus Service notes" I've got, there's a "preload spring in the clutch slave cylinder [that] applies light pressure to the release lever in order to ensure that contact between the release bearing and diaphragm spring fingers is maintained."
So, the bearing is in contact with the clutch all the time and therefore could cause a squeak which disappears once a bit more pressure is applied.
HTH
Paul
Right, the not so nice man from Norfolk has finally (month later) done the inspection and........"not covered under warranty mate"...... "got to take the box out too get near it"....."I'll give you a quote"......"oh and you may as well change the clutch whilst its on bits!!"!!!!
So big bill coming my way for what is apparently a wear and tear issue in the bearing (15k miles, 2 years old!!)...????
Anyone know a decent local specialist to Northampton who would also give me a REASONABLE quote for a new clutch and any ideas how much I will be looking at???
Cheers
Dave
So big bill coming my way for what is apparently a wear and tear issue in the bearing (15k miles, 2 years old!!)...????

Anyone know a decent local specialist to Northampton who would also give me a REASONABLE quote for a new clutch and any ideas how much I will be looking at???
Cheers
Dave
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


