Pagids; RS14's or RS42's...?
Discussion
Hello hello everybody!
Right, I'm going through 1144's far too quickly. There's still a lot of pad left on them (half) but I think I cook them and the pad just provides no absolute bite....twice now this has happened so it's definitely the pad (the first time a new set fixed it after going the whole bleeding/changing fluid route).
So...I'm going to invest in some pagids. I see there are two types though....14's and 42's. Which is more preferable? I'll not do any trackdays (maybe 1, but that shouldn't be considered) but I do mostly very hard/fast road driving (which is how I've managed to kill 3 sets of 1144's)....all on my European trip thingies (God they're fun!).
So, which is the more favourable? Are the 14's slightly better at slightly higher temperature?
PS: Anybody want to buy a brand new set front/rear Mintex 1144's?
Right, I'm going through 1144's far too quickly. There's still a lot of pad left on them (half) but I think I cook them and the pad just provides no absolute bite....twice now this has happened so it's definitely the pad (the first time a new set fixed it after going the whole bleeding/changing fluid route).
So...I'm going to invest in some pagids. I see there are two types though....14's and 42's. Which is more preferable? I'll not do any trackdays (maybe 1, but that shouldn't be considered) but I do mostly very hard/fast road driving (which is how I've managed to kill 3 sets of 1144's)....all on my European trip thingies (God they're fun!).
So, which is the more favourable? Are the 14's slightly better at slightly higher temperature?
PS: Anybody want to buy a brand new set front/rear Mintex 1144's?
I have the 42's on my car now and they're great. Combined with the EBC discs it's good stopping power 
But they rattle a lot
Anyone know how to fix this ? If I touch the brake a little the rattling stops. Seems like it's the grooves in the disc causing this,due to the pads being to lose in the caliper .It's very annoying 
But they rattle a lot
Anyone know how to fix this ? If I touch the brake a little the rattling stops. Seems like it's the grooves in the disc causing this,due to the pads being to lose in the caliper .It's very annoying 
Edited by cej on Wednesday 30th May 10:08
I have used '42's for about 18 months. They are brilliant.
The "buffers" you get with them are a load of rubbish. I used the original anti-squeal shims and some duck tape! Odd solution but it works well.
The big secret is that when they start to squeal, just go for a good fast drive. Work the squeal out of the little barstewards
The "buffers" you get with them are a load of rubbish. I used the original anti-squeal shims and some duck tape! Odd solution but it works well.
The big secret is that when they start to squeal, just go for a good fast drive. Work the squeal out of the little barstewards

I killed my first set of standard pads in 7k miles. (mix of fast road and track) Then i got 42s and they lasted 11k miles with similar usage. They are infinitely better! I wouldnt say that they are too hard on discs which lasted till 22k miles. I would say the 42s are not overkill for road use only. All IMHO. HTH cheers Ed
Edited by edp190 on Wednesday 30th May 19:38
edp190 said:
I killed my first set of standard pads in 7k miles. (mix of fast road and track) Then i got 42s and they lasted 11k miles with similar usage. They are infinitely better! I wouldnt say that they are too hard on discs and they lasted till 22k miles. I would say the 42s are not overkill for road use only. All IMHO. HTH cheers Ed
My concern is about braking from cold? With my mintexs' the first thing I do is ride the brakes for a few seconds before I get to the junction at the end of my drive. That's enough to get them going. Aren't Pagids a bit of a nightmare until properly warmed up?Edited by edp190 on Wednesday 30th May 19:36
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff



