Running in
Author
Discussion

TTwiggy

Original Poster:

11,884 posts

235 months

Monday 4th June 2007
quotequote all
Hi folks - it's now about 2 weeks and counting until I pick up my new Elise S, so i was wondering what the received wisdom is on running in the Toyota (134bhp) engine?

I know that general opinoion is to limit the revs for the first 800-1000 miles, but there is also a school of thought that believes that, as long as the oil is warm, one should 'go for it' early in the engine's life in order to maximise the performance...

any thoughts?...

planty67

27 posts

236 months

Monday 4th June 2007
quotequote all
The handbook is pretty clear that you should limit the revs for the first 1000 miles or so. Having said that it also states that higher revs occasionally can be good for it. It also claims that they can tell whether this has been followed at the first service (download or something). I don't know whether this is true but I figured 1000 miles of driving like a nun was worth it to keep the warranty valid!

Davey S2

13,394 posts

285 months

Monday 4th June 2007
quotequote all
Follow what it says in the handbook.

You can and should use full revs after 600 miles but only for very brief bursts.

At the 1000 mile aftercare service they will download the data from the ecu which lists the max revs used, 5 top 0-60 times etc.

If you have thrashed the nuts off the car it will invalidate your warranty.

Dont be too gentle with it but just be sensible.

Tam

135 posts

270 months

Monday 4th June 2007
quotequote all
planty67 said:
The handbook is pretty clear that you should limit the revs for the first 1000 miles or so. Having said that it also states that higher revs occasionally can be good for it. It also claims that they can tell whether this has been followed at the first service (download or something). I don't know whether this is true but I figured 1000 miles of driving like a nun was worth it to keep the warranty valid!
Yep, dealers can print out the ECU info and see how high the car has revved in the first 1000 miles. Easy way for Lotus to get out of refusing any warranty work so its well worth being careful

TTwiggy

Original Poster:

11,884 posts

235 months

Monday 4th June 2007
quotequote all
I hear you, but I'd imagine they'd be on dodgy ground legal-wise by trying to enforce that... after all, the handbook is a 'guide' - you don't sign anything to acknowledge loss of your basic rights for failing to comply with a 'guide'...

having said that, i'm not planning on ragging the pants off it, i was just curious...

jondude

2,441 posts

248 months

Monday 4th June 2007
quotequote all
They did a test on this in the motorcycle world, pretty sure it was in 'RIDE' magazine, or 'MCN'.

They run a bike in by the book, and the same model as you state above - harder even, as they really mixed up the power and revs.

I can't remember the actual figures, but the 'madman' run in bike was really well up on horsepower when put on a dyno after the run in period - even the journalists were shocked. ( Think it was close on 10 horses more, or a whopping 15% or so more power at the back wheel ).

As they said, they could not tell if this mad running in would affect the engine life, only time would tell.

jondude

2,441 posts

248 months

Monday 4th June 2007
quotequote all
PS Whatever you decide, there is absolutely no doubt that what a car or bike needs most when running in, is crisp revs and loads of gearchanges. You do not want to labour the engine, or cruise at 60 mph for hours on a motorway - the latter can round the pistons and seriously zap your horses.

Loads of 'A' and 'B' roads for you!

A top Indy Car mechanic did once write it is all about heat. Heat and cooling. He recommended loads of crisp drives as above, but that you pull over and let the engine cool frequently, too.

This is when it beds in and the metals take shape.

Which all points to loads of bends, crisp ( but not too high ) revs, gearchanges galore...then stopping for an ice-cream.

Come to think of it, perfect Lotus driving conditions!