Discussion
Gooby said:
I think the standard elise ride height is a little high and now I have some aftermarket suspension (dropped by 15mm), is there an optimum height for the suspension?
I have no problem with speed bumps etc, mainly because I have taken off the front number plate.
TTIWWP, or whatever the correct acronym is.I have no problem with speed bumps etc, mainly because I have taken off the front number plate.
I agree that the standard height leaves a pretty ugly gap between wheel and arch and will hopefully be getting this resolved soon.
Does anyone know what the standard height is on an Exige S and, as per Gooby, is there a preferred height for mainly road use?
tuscan_thunder said:
what suspension have you bought Gooby?
110/120 is usually about right but with a stiffer set-up you might be able to drop it further.
I have speedyellows old 2 way adjustables (Ohlins) from his 240R. Basically 240R suspension. It has been on for a couple of months, I am just thinking about tinkering BUT I know sod all about suspension....110/120 is usually about right but with a stiffer set-up you might be able to drop it further.
Leave it at whatever Plans set it up with would be my suggestion Gooby. As I'm sure you know, altering height then alters camber etc. so you'll lose benefit of the settings you already have.
When I was in it last it felt very nicely planted, looked lower and more purposeful (plenty of camber on the rear) than before and seems to handle very well.
Did you talk to them about how they'd set it up for you? Do I remember right that it was corner-weighted too?
When I was in it last it felt very nicely planted, looked lower and more purposeful (plenty of camber on the rear) than before and seems to handle very well.
Did you talk to them about how they'd set it up for you? Do I remember right that it was corner-weighted too?
S Works said:
Leave it at whatever Plans set it up with would be my suggestion Gooby. As I'm sure you know, altering height then alters camber etc. so you'll lose benefit of the settings you already have.
When I was in it last it felt very nicely planted, looked lower and more purposeful (plenty of camber on the rear) than before and seems to handle very well.
Did you talk to them about how they'd set it up for you? Do I remember right that it was corner-weighted too?
Yep planted and corner weighted - LovelyWhen I was in it last it felt very nicely planted, looked lower and more purposeful (plenty of camber on the rear) than before and seems to handle very well.
Did you talk to them about how they'd set it up for you? Do I remember right that it was corner-weighted too?
As I said I know sod all about suspension so the desire to fiddle with the suspension is held back by me being an idiot...
Gooby, seriously don't go for silly low ride heights. If the car is handling well and doesn't hit speedbumps then you should leave it alone. Changing the ride height will mean a whole new geo and cornerweight.
FWIW, S1 front clam design allows for lower front ride height than the S2 for equivalent front ground clearance. Try 100mm on the front on an S2 and you will hit most things. I scrape occasionally at 115/120.
Walshy actually increased the ride height on his road car to 120 at the front iirc because he was sick of hitting the front clam.
FWIW, S1 front clam design allows for lower front ride height than the S2 for equivalent front ground clearance. Try 100mm on the front on an S2 and you will hit most things. I scrape occasionally at 115/120.
Walshy actually increased the ride height on his road car to 120 at the front iirc because he was sick of hitting the front clam.
shangani said:
Gooby, seriously don't go for silly low ride heights. If the car is handling well and doesn't hit speedbumps then you should leave it alone. Changing the ride height will mean a whole new geo and cornerweight.
FWIW, S1 front clam design allows for lower front ride height than the S2 for equivalent front ground clearance. Try 100mm on the front on an S2 and you will hit most things. I scrape occasionally at 115/120.
Walshy actually increased the ride height on his road car to 120 at the front iirc because he was sick of hitting the front clam.
OK - I wont play with the ride height(tut). What else can I play with?? FWIW, S1 front clam design allows for lower front ride height than the S2 for equivalent front ground clearance. Try 100mm on the front on an S2 and you will hit most things. I scrape occasionally at 115/120.
Walshy actually increased the ride height on his road car to 120 at the front iirc because he was sick of hitting the front clam.
FWIW, S1 front clam design allows for lower front ride height than the S2 for equivalent front ground clearance. Try 100mm on the front on an S2 and you will hit most things. I scrape occasionally at 115/120.
Hi Shangani,
What`s a good ride height (for road use) on an S1 then? Is it the same as the S2? or do most people lower further because of the front clam design and can get away with it? I just wonedered as it`s somthing i`m considering.
cheers,
Mark
Hi Shangani,
What`s a good ride height (for road use) on an S1 then? Is it the same as the S2? or do most people lower further because of the front clam design and can get away with it? I just wonedered as it`s somthing i`m considering.
cheers,
Mark
Goobs, don't know if you saw my 'spotted' here and on Seloc, but I saw you in London last month and the car looks very low indeed. My 160 was 90/100 before the Nitrons went on, and that was stupidly low, but it looked awesome. I wish I couldget the Nitron at that height but Sincs recommended against it, which I can understand.....
Hollywood Wheels said:
Goobs, don't know if you saw my 'spotted' here and on Seloc, but I saw you in London last month and the car looks very low indeed. My 160 was 90/100 before the Nitrons went on, and that was stupidly low, but it looked awesome. I wish I couldget the Nitron at that height but Sincs recommended against it, which I can understand.....
Wow, didnt realise we almost met!I have been told by the collective genius that is PH and I wont go lower. It is a bit silly to play with a set up that works really well.
There was a silly reason for it, just wanted to get below the 40 inch height!
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff





