Recommened a torque wrench?
Discussion
The Penguin said:
Is it the proffesional one there professional range is very good. I use mine alot and have not broken anything yet! The lifetime garuantee is also great as they will replace it if you manage to break it 
The halfrauds pro range is very good - I find the quality is superb and what is lacking in build quality is made up by the lifetime guarentee. Anls a FRACTION of snapon prices...
Edited by The Penguin on Sunday 17th June 09:45
Halfords it is then, next question is what one? Wheels are 105nm so both the 40-200nm and the 60-300nm would do the job. Is the extra 100nm more useful that the lower 40-60nm range?
Halfords Torque Wrenches
Only jobs I can forsee is changing spark plugs and maybe the exhaust. Maybe the discs / calipers at some point. Certainly not intending to get into major engine work or anything.
Also, would a smaller 8-60nm wrench be any good is it it less critical when tightening smaller bolts etc?
Halfords Torque Wrenches
Only jobs I can forsee is changing spark plugs and maybe the exhaust. Maybe the discs / calipers at some point. Certainly not intending to get into major engine work or anything.
Also, would a smaller 8-60nm wrench be any good is it it less critical when tightening smaller bolts etc?
If you do some research on the net, you will find most experts actually recommend the cheap and cheerful pressure loaded torque wrench, the ones that look like a letter 'T' and cost £5.
The professional wrenches are, apparently, far too likely to go out of calibration, and if they are not regularly re-set, they are, in effect, dangerous.
The 'T' ones are fairly accurate and extremely robust as far as staying in grade goes!
Having said that, you do tend to find many bolts have torque ranges, not settings. For example: 10ilbs-15ilbs. So you just set the wrench for 13 and it should be fine.
Conclusion? If you are going at the internals of the engine, use a pro wrench but get it calibrated often.
If it is on bigger items such as suspension, wheel nuts, spark plugs etc, use a 'T' and be happy!
The professional wrenches are, apparently, far too likely to go out of calibration, and if they are not regularly re-set, they are, in effect, dangerous.
The 'T' ones are fairly accurate and extremely robust as far as staying in grade goes!
Having said that, you do tend to find many bolts have torque ranges, not settings. For example: 10ilbs-15ilbs. So you just set the wrench for 13 and it should be fine.
Conclusion? If you are going at the internals of the engine, use a pro wrench but get it calibrated often.
If it is on bigger items such as suspension, wheel nuts, spark plugs etc, use a 'T' and be happy!
For reliability and accuracy, from a professional perspective, I'd recommend Norbar. Theyre available from all decent tool stockists. Theyre robust and I've never had a problem with mine. I have a 1/2" drive and a 3/8" drive. The 1/2" is about 20 years old and the 3/8" about 4 years old. I had them both recalibrated 6 months ago. The larger one was only 4% out and the 3/8" was spot on - and believe me, that 1/2" wrench has seen some use and abuse over the years! I was expecting to have to scrap it but it was absolutely fine right across the working range.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


