Help urgently needed - front caliper piston seals for an S1
Discussion
Hi All,
In case you're wondering why I'm posting on the Elise section (ie, Mods, please don't move it) for help on an MG ZT 260 problem, the calipers fitted to the front of the Elise S1 are exactly the same as those fitted to the rear of the ZT260 (except yours say "Lotus" on them, and mine don't).
I've just been replacing the pads and looking to unstick a sticking piston, only to find out that one of the piston seals had gone. The supplier of the calipers (whom I won't name, as I'm ranting about them on General Gassing) refuse to sell spare seals, and will only sell the whole calipers. These cost over £300 once the VAT is added on.
Have any S1 owners had a problem with seals going on their front brakes, and if so, have any of you found an alternative to buying new calipers? Ideally, an aftermarket supplier of replacement seals?
I'm currently stuck without a car, so any help would be very welcome!
In case you're wondering why I'm posting on the Elise section (ie, Mods, please don't move it) for help on an MG ZT 260 problem, the calipers fitted to the front of the Elise S1 are exactly the same as those fitted to the rear of the ZT260 (except yours say "Lotus" on them, and mine don't).
I've just been replacing the pads and looking to unstick a sticking piston, only to find out that one of the piston seals had gone. The supplier of the calipers (whom I won't name, as I'm ranting about them on General Gassing) refuse to sell spare seals, and will only sell the whole calipers. These cost over £300 once the VAT is added on.

Have any S1 owners had a problem with seals going on their front brakes, and if so, have any of you found an alternative to buying new calipers? Ideally, an aftermarket supplier of replacement seals?
I'm currently stuck without a car, so any help would be very welcome!
If youre sure they are the same, this should fit the bill....
http://www.eliseparts.com/shop/index.php?main_page...
http://www.eliseparts.com/shop/index.php?main_page...
Hi,
I've have a front caliper that you could have, it is damaged around the bleed nipple area though thanks to a heavy handed mechanic who cracked the casting! The seals in it are spot on as far as I can tell. If you want it to look at and maybe cannibalise for the seals your more than welcome to have it.
Tom
I've have a front caliper that you could have, it is damaged around the bleed nipple area though thanks to a heavy handed mechanic who cracked the casting! The seals in it are spot on as far as I can tell. If you want it to look at and maybe cannibalise for the seals your more than welcome to have it.
Tom
tom_allen said:
Hi,
I've have a front caliper that you could have, it is damaged around the bleed nipple area though thanks to a heavy handed mechanic who cracked the casting! The seals in it are spot on as far as I can tell. If you want it to look at and maybe cannibalise for the seals your more than welcome to have it.
Tom
Hi Tom,I've have a front caliper that you could have, it is damaged around the bleed nipple area though thanks to a heavy handed mechanic who cracked the casting! The seals in it are spot on as far as I can tell. If you want it to look at and maybe cannibalise for the seals your more than welcome to have it.
Tom
That's a great offer, and a perfect example of the wonderful nature of PH, thanks!
I'll email you from here.Cheers,
Chris.
Kermit:
That's funny. I had my seal on my front calipers on my S1 go and it was pi$$ easy to get seals for it, and I'm in NZ. They're an AP-racing caliper and I just went to my local AP-Racing agent and quoted them the appropriate part numbers.... 2 weeks later, the seal kit arrived and cost me 50 bucks for the fluid seals and dust seals for BOTH front calipers (that's about 20 quid).
That's funny. I had my seal on my front calipers on my S1 go and it was pi$$ easy to get seals for it, and I'm in NZ. They're an AP-racing caliper and I just went to my local AP-Racing agent and quoted them the appropriate part numbers.... 2 weeks later, the seal kit arrived and cost me 50 bucks for the fluid seals and dust seals for BOTH front calipers (that's about 20 quid).
Esprit said:
Kermit:
That's funny. I had my seal on my front calipers on my S1 go and it was pi$$ easy to get seals for it, and I'm in NZ. They're an AP-racing caliper and I just went to my local AP-Racing agent and quoted them the appropriate part numbers.... 2 weeks later, the seal kit arrived and cost me 50 bucks for the fluid seals and dust seals for BOTH front calipers (that's about 20 quid).
It is getting more confusing by the minute. I've had AP tell the nearby factor no. I've had the MG Owners Club confirm that this is an AP thing, and yet I've got other people telling me that there shouldn't be a problem. I'm sure I'll get there in the end!That's funny. I had my seal on my front calipers on my S1 go and it was pi$$ easy to get seals for it, and I'm in NZ. They're an AP-racing caliper and I just went to my local AP-Racing agent and quoted them the appropriate part numbers.... 2 weeks later, the seal kit arrived and cost me 50 bucks for the fluid seals and dust seals for BOTH front calipers (that's about 20 quid).
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff



