Respray car door ( inside ) self....how hard can it be????
Discussion
Have picked up lots of scratches and nicks on the inside of the car doors, and am thinking I may have a go myself at respraying the whole inner panel, as it is not tooooo important to have a perfect finish.
Is it a case of sand down, primer, paint, laquer...and that's it??
What type of 'sandpaper' should I use to remove the paint?
If anyone has had a professional do this job, please let me know how much it cost - I would consider it if the price is not too silly.
Is it a case of sand down, primer, paint, laquer...and that's it??
What type of 'sandpaper' should I use to remove the paint?
If anyone has had a professional do this job, please let me know how much it cost - I would consider it if the price is not too silly.
Use something like P180 wet and dry paper to rub the paint back. Use a sanding block, not your hands. Then two or three coats of primer, rub them back with something like P360 w&d (use it wet - just a small amount of water) and then finish it with P600. Then a few coats of colour and a few coats of laquer.
If it is a bit orange-peely you may want to rub the laquer back with P1500 followed by P2000 before giving it a good polish with something like Farecla G3 and then Farecla G10 (although on a door you may be able to get away with something like autoglym paint renovator and super resin polish as you will be doing it by hand).
That is a basic guide.
Mike
If it is a bit orange-peely you may want to rub the laquer back with P1500 followed by P2000 before giving it a good polish with something like Farecla G3 and then Farecla G10 (although on a door you may be able to get away with something like autoglym paint renovator and super resin polish as you will be doing it by hand).
That is a basic guide.
Mike
Thanks for above - appreciated.
Tina - I know Sinclaires have a reputaion for top quality work, and I would not object to paying a little extra for this, but the few times I have asked them for quotes they have been at least double the price of others, and quite shady about firm prices - also with servicing quotes.
Once bitten, twice shy and all that!
Tina - I know Sinclaires have a reputaion for top quality work, and I would not object to paying a little extra for this, but the few times I have asked them for quotes they have been at least double the price of others, and quite shady about firm prices - also with servicing quotes.
Once bitten, twice shy and all that!
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


