Pops and Bangs!! - Wet Plugs....
Discussion
Hi All,
been using my S1 as a daily driver for last 4 months and unlike many well loved pets it lives on the street outside my house!
So far been 100% reliable, but, after last nights downpour it was the final straw and today its been misfiring and popping and banging like a good 'un!
Took it local stealer and diagnosed water in the plugs. Quick blow out, new plugs +100 quid fixed it.
Question is, does anyone know of a robust fix, so it will stop the plugs filling with water again? Was thinking of siliconing the plug cover on. But not sure it will take the heat??
Cheers for your help and roll on Nordschlieffe this weekend!
been using my S1 as a daily driver for last 4 months and unlike many well loved pets it lives on the street outside my house!
So far been 100% reliable, but, after last nights downpour it was the final straw and today its been misfiring and popping and banging like a good 'un!
Took it local stealer and diagnosed water in the plugs. Quick blow out, new plugs +100 quid fixed it.
Question is, does anyone know of a robust fix, so it will stop the plugs filling with water again? Was thinking of siliconing the plug cover on. But not sure it will take the heat??
Cheers for your help and roll on Nordschlieffe this weekend!
Agree with Greysquirrel - stay well clear of this dealer. Amazing he didn't do the job for free as a means of keeping your business - often a squirt of WD40 ( 99p) will do it.
As would you waiting for sun...OK, that can take a lloooong time here.
You could start covering the car - even a cheap cover will keep water out.
It is not too difficult to fabricate a shield for the distributor cap and leads, either. This is more likely the culprit than the leads and wells, as this area is quite unprotected.
I'd go the cover route and have a can of WD40 handy next time.
As would you waiting for sun...OK, that can take a lloooong time here.
You could start covering the car - even a cheap cover will keep water out.
It is not too difficult to fabricate a shield for the distributor cap and leads, either. This is more likely the culprit than the leads and wells, as this area is quite unprotected.
I'd go the cover route and have a can of WD40 handy next time.
Stevie thats what I did last night!! Thanks for the help, common census seems to be S2 head cover plus silicone!! Was thinking of fabricating something, but, no time before ring trip this weekend, also why I allowed myself to get done over by the dealer!
PS. My neighbour has Sport 160 and did sound just the same, except his finally clears it throat at 4k rpm!! Mine just sounded like a chainsaw!! lol!!
PS. My neighbour has Sport 160 and did sound just the same, except his finally clears it throat at 4k rpm!! Mine just sounded like a chainsaw!! lol!!
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff



