Is this a Genuine 111s?
Discussion
Sellers seem uneasy to give out the vin numbers over the phone. As for why so doubts there are a few advertised which have said 111s but have turned out to be just a normal s1 with an aftermarket exhaust. I just want to make sure before I make a 500 mile round trip
Edited by Stig95 on Thursday 5th July 22:25
Edited by Stig95 on Thursday 5th July 22:27
Mikey_W said:
boobles said:
Well according to insurance qoutes, its a standard 2dr not a 111s. See how confusing it can be.

Would a full HPI check give the correct answer?
Im just stating the fact that that when you type in the number plate for insurance qoutes, it says 2dr. When i type in another plate from the classifies which is also a 111s, it comes back as a 111s not standard 2dr. hence the concern!
Looks largely like a 111S, although isn't it missing the "111S" badge from the rear? There's usually one just underneath where the "Elise" script is. Of course it's possible that it's had a repair and the "111S" badge was never re-added, or it's possible that some never had them in the forst place.
Everything else looks pukka though. Worth checking the engine out though. Should be able to tell at a glance.
Everything else looks pukka though. Worth checking the engine out though. Should be able to tell at a glance.
It looks ok compared to my 111S (all the right add ons compared to the std S1), but I agree with ESPRIT it should have a 111S sticker on the rear clam directly below the Elise sticker. This could mean it's had a repaired / replacement rear clam so have a good look for any obvious repairs / insurance issues etc.
The only real way of telling is via the VIN as previous stated; although a look at the engine (cam covers) will give a pretty good indication.
Happy hunting
The only real way of telling is via the VIN as previous stated; although a look at the engine (cam covers) will give a pretty good indication.
Happy hunting
rfoster said:
That's a 111S - look at the bulge in the bootlid cover - it's higher than the standard S1 to accomodate the slightly taller VVC engine.
I wouldn't take that as gospel.........mine is a special ed that is kitted out like an S1 and also has the bonnet bulge, yet its only a standard car...........I think the fact that it doesn't have the "111S" badge under the Elise sticker at the rear is a good indicator. The only OTHER Millenium Edition I have seen was a 111S and it DID have the badge, even though it looked exactly the same as mine........
TheYeti said:
rfoster said:
That's a 111S - look at the bulge in the bootlid cover - it's higher than the standard S1 to accomodate the slightly taller VVC engine.
I wouldn't take that as gospel.........mine is a special ed that is kitted out like an S1 and also has the bonnet bulge, yet its only a standard car...........I think the fact that it doesn't have the "111S" badge under the Elise sticker at the rear is a good indicator. The only OTHER Millenium Edition I have seen was a 111S and it DID have the badge, even though it looked exactly the same as mine........
FYI, ALL Elises (VVC or otherwise) got the taller bootlid from when they started bringing it in on the VVC powered cars.
[quote=EspritFYI, ALL Elises (VVC or otherwise) got the taller bootlid from when they started bringing it in on the VVC powered cars.
[/quote]
I don't believe that's correct - my 2000 'W' Elise S1 didn't have the bootlid bulge on it. (Neither did my '98 S1 but that was before the 111S came out.)
The 111S decals were optional, according to www.elises.co.uk
[/quote]
I don't believe that's correct - my 2000 'W' Elise S1 didn't have the bootlid bulge on it. (Neither did my '98 S1 but that was before the 111S came out.)
The 111S decals were optional, according to www.elises.co.uk
It looks very much like a 111s to me, smoked indicators, carbon dash inserts, alloy window winders, engine bulge, dash stickers, spoiler etc. Don't 111s have wider rear arches for the 225 tyres? As said though, the VVC engine is the giveway if you get the guy to send you an engine picture. Red spark plug cover and VVC machined in. Have tried to find a picture of mine, but it's locked away in the garage at home at the moment. Will forward one on when I get home if I get time.
rfoster said:
Esprit said:
FYI, ALL Elises (VVC or otherwise) got the taller bootlid from when they started bringing it in on the VVC powered cars.
I don't believe that's correct - my 2000 'W' Elise S1 didn't have the bootlid bulge on it. (Neither did my '98 S1 but that was before the 111S came out.) The 111S decals were optional, according to www.elises.co.uk
Also, the rear arches on the 111S weren't wider, they just had a small plastic lip on the rear wheel arches, at the back. each stuck out the 3mm needed to "enclose" the tyre suffuciently for type-approval.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff





