Drivers seat lowering.
Drivers seat lowering.
Author
Discussion

Eidhur

Original Poster:

33 posts

232 months

Friday 6th July 2007
quotequote all
Hi all, Does anyone know if there is anyway that the drivers seat in a s2 exige or s2 elise can be lowered, or if any company produce a product doing this. I am 6"3 and wearing a helmet is not the most comfortable ! so was wondering if you could lower it in anyway, i dont mind if the seat becomes fixed. Any help would be appreciated, thanks a lot.

Twinpipe

1,396 posts

260 months

Friday 6th July 2007
quotequote all
I'm sure you could squeeze a couple more inches by removing the the runners but I think it would have to be a custom fit.

shangani

3,069 posts

268 months

Friday 6th July 2007
quotequote all
It is very difficult to do with the standard elise, 340R or exige seat. They are attached at different points to the aftermarket seats. You could get someone to make you a custom mount, but the base of the seat is really thick and you will still likely have problems.

I had exactly the same problem with wearing a helmet (not 6 ft 3, but short legs and long body proportions) with the roof on (I couldn't).

I bought an eliseparts seat, made a custom mount and now the seats sits on the floor, tilted back a bit (more rake) this has gained me around 3-4cm of headroom. Not much, but enough to make a big difference. In retrospect I would get a CF Mog seat with an even thinner base and mount it the same way.


Eidhur

Original Poster:

33 posts

232 months

Friday 6th July 2007
quotequote all
Just found this link, it may be worth a shot....!


DOWNlow Seat RailsDOWNlow Seat Rails, $225.00. Improve your overhead. This is the best solution for those with a longer torso, or greater than average height. ...

www.sector111.com/handler.cfm?cat_id=20219&cat... - 17k -

shangani

3,069 posts

268 months

Friday 6th July 2007
quotequote all
Perfect. I didn't know that existed. Definitely the answer if you already have the nice seats with harness cutouts.

Scuffers

20,887 posts

305 months

Friday 6th July 2007
quotequote all
it's either that or just change the seat for MOG's or the like with fixed rails...

done this to mine, and I have never got as low in the car as it is now, like me head is now a good 4" lower...

they look like this:

http://www.msar-safety.com/index.php?main_page=ind...


S Works

10,166 posts

281 months

Friday 6th July 2007
quotequote all
^ Lovely piece of kit those Mog seats. Had a look at JamesK's at Oulton and they really are a work of art. Apparently pretty comfortable too, even for long distances.

mnewlyn

413 posts

282 months

Sunday 8th July 2007
quotequote all
whish I'd asked this question ages ago, but then againthose two product look fairly new so...

anyhow, now I don't know which solution to choose - do those MOG seats get sweaty?

Eidhur

Original Poster:

33 posts

232 months

Sunday 8th July 2007
quotequote all

I was wondering what the intrest would be in doing a group buy for the DOWNlow Seat Rails.
They are based in the USA so if we purchased on mass at least postage would be cheaper, let alone haggling for a reduction.
I will e mail them and ask about group reductions.
What do you think ????



www.sector111.com/handler.cfm?cat_id=20219&cat...

mnewlyn

413 posts

282 months

Monday 9th July 2007
quotequote all
I'd be up for that.

dgr

289 posts

265 months

Monday 9th July 2007
quotequote all
I May be interested as well