Replacing Temp Senders Elise S1
Discussion
not difficult but you need to be quick when you unscrew them so you don't lose too much coolant (and obviously don't do it when the coolant is hot!) Why do you need to replace both though? One is for the Stack, the other for the ECU ... are you sure they are both US? They are quite easy to check with a multi-meter set to ohms, I can give you the readings at various rough temperatures if you wish. HTH
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff



of a job. And dont drop the little clips either or you wont see it again