Front Discs and Pads
Author
Discussion

Pied Piper

Original Poster:

1,388 posts

278 months

Monday 16th July 2007
quotequote all
The front discs are coming to the end of their useful life, I will be replacing them soon.

I've done a search on here and am slightly confused (not unusual).

Am I best to replace all 4 discs and pads and upgrade, or stick with original equipment and just replace fronts?

Or can I just upgrade the front discs, stick with the original rears and upgrade all pads?

Any advice/opinion is welcome.


Rosso Rebel

303 posts

285 months

Monday 16th July 2007
quotequote all
byebye I don't know about the disk's, .....but, hmmmmm Mintex Pads - made a big difference. On the VX the oem disk's are as good as anything aftermarket so it's recommend to keep them but upgrade the pads.
eek Sorry Tel, VX advice on the lotus forum laugh

Pied Piper

Original Poster:

1,388 posts

278 months

Monday 16th July 2007
quotequote all
Rosso Rebel said:
byebye I don't know about the disk's, .....but, hmmmmm Mintex Pads - made a big difference. On the VX the oem disk's are as good as anything aftermarket so it's recommend to keep them but upgrade the pads.
eek Sorry Tel, VX advice on the lotus forum laugh
wavey You stalking me? laugh

Just been looking on SELOC looks like it's going to be Mintex or Pagids with OEM discs unless someone recommends a better combo.

Pied Piper

Original Poster:

1,388 posts

278 months

Monday 16th July 2007
quotequote all
Rosso Rebel said:
byebye I don't know about the disk's, .....but, hmmmmm Mintex Pads - made a big difference. On the VX the oem disk's are as good as anything aftermarket so it's recommend to keep them but upgrade the pads.
eek Sorry Tel, VX advice on the lotus forum laugh
wavey You stalking me? laugh

Just been looking on SELOC looks like it's going to be Mintex or Pagids with OEM discs unless someone recommends a better combo.

Stephanie Plum

2,797 posts

242 months

Monday 16th July 2007
quotequote all
I've got Mintex pads with OEM disks at the moment and they work really well - be warned though, Mintexs wear out fairly quickly! I'm going to be due some new disks pretty soon and am tempted by some grooved or drilled ones - thinking about stopping in the wet come the winter - can take a split second to clear the standard disks of water in bad weather, so hoping it might make a difference.

Would be interested to hear peoples opinions on this.

cej

961 posts

253 months

Monday 16th July 2007
quotequote all
I have the Pagid RS42 pads and the EBC grooved brake discs. It's a very good combo. I can highly recommend it thumbup

http://www.eliseparts.com/shop/index.php?main_page...

http://www.eliseparts.com/shop/index.php?main_page...

they make the discs for S2 as well

stevie111s

123 posts

266 months

Tuesday 17th July 2007
quotequote all
Terry, an option I have used several times now on my elises is to get the disks skimmed. This is cheap (about £15 an axle) and very effective when done in combination with pad change, good as new in fact at a fraction the cost. HTH

Pied Piper

Original Poster:

1,388 posts

278 months

Tuesday 17th July 2007
quotequote all
stevie111s said:
Terry, an option I have used several times now on my elises is to get the disks skimmed. This is cheap (about £15 an axle) and very effective when done in combination with pad change, good as new in fact at a fraction the cost. HTH
Thanks but their is not much left to skim, may well get the backs skimmed though. Thanks for that.

edp190

336 posts

240 months

Tuesday 17th July 2007
quotequote all
Anther Pagid fan here, not cheap but well worth the extra cash! smile

ps imho its the pads that make the difference not the discs!

Edited by edp190 on Tuesday 17th July 14:39

RobM77

35,349 posts

265 months

Tuesday 17th July 2007
quotequote all
The place servicing my Elise 111S have just called me saying I need new discs and pads all round. They say that the original equipment cross drilled ones are purely cosmetic, and it's just as good to replace them with plain steel discs, which are nearly half the price. Is this right? I've gone for the plain steel ones.

JTBUSH

629 posts

239 months

Tuesday 17th July 2007
quotequote all
Could just get the plain steel ones down to an engineers and get them drilled, and then for that extra bit of heat dissipation, get the drilled holes tapped.


RobM77

35,349 posts

265 months

Tuesday 17th July 2007
quotequote all
JTBUSH said:
Could just get the plain steel ones down to an engineers and get them drilled, and then for that extra bit of heat dissipation, get the drilled holes tapped.
tapped?! you've lost me!

JTBUSH

629 posts

239 months

Tuesday 17th July 2007
quotequote all
Get a thread put onto the inside diamater of the drilled holes, thus increasing your surface area, therefore increasing heat disipation!

RobM77

35,349 posts

265 months

Tuesday 17th July 2007
quotequote all
JTBUSH said:
Get a thread put onto the inside diamater of the drilled holes, thus increasing your surface area, therefore increasing heat disipation!
aha! I hadn't made that connection. That's rather clever, like an intestine smile

JTBUSH

629 posts

239 months

Tuesday 17th July 2007
quotequote all
Problem is, brake dust build up is bad enough in the holes, without then adding to the problem by putting threads there to hold onto the dust better.


cej

961 posts

253 months

Tuesday 17th July 2007
quotequote all
Grooved discs work just fine. No need for drilled unless it's a race car

RobM77

35,349 posts

265 months

Tuesday 17th July 2007
quotequote all
Thanks. There was quite a considerable cost saving, and I'm uprating the pads as well so I have a feeling my disc wear may increase as a result so I'm happy with a cheaper disc if the difference is only cosmetic.

JTBUSH

629 posts

239 months

Tuesday 17th July 2007
quotequote all
How much you been quoted for the plain disks. Ive currently got drilled and they need changing soon!

TonyHetherington

32,091 posts

281 months

Tuesday 17th July 2007
quotequote all
I had 2 sets of Mintex 1144's and they wore out way too quickly...6000 miles I got each set and the pad wasn't worn all the way down (only half way) but the feel totally went. Haven't driven the car for about 6 weeks now but have a total set of pagids ready to go on in time for MegaHoon biggrinbiggrinbiggrinbiggrin

Heard VERY good things of the Pagids, so watch this space ohhhhhh yes!

vetteheadracer

8,273 posts

284 months

Tuesday 17th July 2007
quotequote all
AP Racing front disks and Pagid RS42 pads on mine......pedal feel is still rubbish but will get the stupid rubber brake hoses upgraded to the braided ones at the next service to see if this makes the difference.