BRAKE DISC RUST
Author
Discussion

RHY 11S

Original Poster:

78 posts

248 months

Wednesday 18th July 2007
quotequote all
I had some new OEM discs put on last week to replace the Ali-belled discs that were on the car when I bought it (I was having too many problems with the Ali-bells so took them off).

This is the first time I've had OEM discs on and I'm shocked that the centres are covered in rust already! The rust is around the centre where there is no contact with the pads. It looks awful and surely can't be right!

Can anyone advise as to whether this is normal or if I'm missing a trick to avoid this.

I'm really peeved!

Cheers, Rhys

JTBUSH

629 posts

239 months

Wednesday 18th July 2007
quotequote all
I think this is normal.

RHY 11S

Original Poster:

78 posts

248 months

Wednesday 18th July 2007
quotequote all
Really?? I'd expect some rust after months out in the rain, but I now have completely orange centres after just 1 week!


jamwill79

231 posts

249 months

Wednesday 18th July 2007
quotequote all
Think they all do that. My AP's are a slight rust colour apart from the ally bits.

They can be fine just after a drive but as soon as they get a little damp or wet from a wash they are rusty again.

piooly

1,176 posts

256 months

Wednesday 18th July 2007
quotequote all
They do that, its normal. Better disc to go for is the new EBC USR disc. This is a groved type, no dimples or holes. They come with a sort of black paint anodised finish. Only the part that the brake pad touches turns silver (the metal shows) the rest of the disc stays protected and black, that look great!

21TonyK

13,398 posts

240 months

Wednesday 18th July 2007
quotequote all
Quick rub with a kitchen scourer and a can of Hammerite smooth satin paint for a fiver in halfords fixes the problem.

kambites

71,703 posts

252 months

Wednesday 18th July 2007
quotequote all
It only takes about half an hour of rain to rust the disks significantly.

fatboy111

308 posts

248 months

Wednesday 18th July 2007
quotequote all
Use high temperature black paint from Halfrauds...jobs a good 'un! thumbup

kevin ritson

3,423 posts

258 months

Wednesday 18th July 2007
quotequote all
Or just drive the car round the block - rust goes within a couple of applications of the pedal. Come to think of it the centres of mine have always been OK, it's just the area in contact with the pads that rusts - this is with EBC Turbogrooves

Edited by kevin ritson on Wednesday 18th July 16:50

shangani

3,069 posts

268 months

Wednesday 18th July 2007
quotequote all
Remember that brake discs are iron, not steel. They will generally rust rapidly. Nothing to be concerned about.