Help Please? Ground Clearance
Help Please? Ground Clearance
Author
Discussion

socramsnalla

Original Poster:

396 posts

236 months

Wednesday 1st August 2007
quotequote all
SNCF run a motorail service to southern France that I want to use later in the year. They List Elise/Exige as cars that meets their criteria for the Motorail but they have put a minimum ground clearance stipulation on my Marcos (which they have never heard of) of 10cm. Can someone please let me know what your normal ground clearance on either an Elise/Exige is?

Many thanks

Sam_68

9,939 posts

276 months

Wednesday 1st August 2007
quotequote all
I don't have the factory workshop manual to hand - will check when I get home tonight - but I'm pretty sure the standard ride height is 125mm to the underside of the chassis.

Can anyone else confirm?

AdrianR

822 posts

315 months

Wednesday 1st August 2007
quotequote all
S1 was 140 F & R for std suspension, but they sag a bit over time!

Sports setup can be anywhere down to 100mm, usually with rear 10mm higher to give a bit of rake.

AdrianR

shangani

3,069 posts

268 months

Wednesday 1st August 2007
quotequote all
Do not confuse ride height with front ground clearance. Std ride height is usually not less than 140mm. The front clearance on an S2 is less than an S1 at the same ride height due to the shape of the clams, though not by much. A front splitter lowers clearance without changing ride height.

On an S2 I found a 20-25 mm difference between front ground clearance and front ride height without a splitter and 30 odd mm difference with my alvan splitters. A car running 140 ride height will comfortably exceed 100mm front ground clearance without a front splitter.

AdrianR

822 posts

315 months

Thursday 2nd August 2007
quotequote all
Good point, although I assert that the bottom of the S1 is flat & level so RH = GC if no rake on the suspension.

Best to measure for your specific car if it really matters.

AdrianR

Sam_68

9,939 posts

276 months

Thursday 2nd August 2007
quotequote all
Also, the critical factor with ground clearance negotiating humps or coming over the top of a ramp (not approaching a ramp from the bottom) is usually the risk of grounding at the mid-point of the wheelbase. On standard cars (ie. not raked or fitted with splitters/venturis), the angles of attack at front and rear are usually designed to be better than this 'grounding' clearance to minimise damage by sudden changes in height such as a kerb at the front of a parking bay.

Thanks for correcting my figures for satndard ride height/chassis clearance BTW, Adrian!