Window on S2 - Fault
Author
Discussion

hueandcry71

Original Poster:

1,389 posts

233 months

Thursday 2nd August 2007
quotequote all
Mine will only go up %80. Any ideas ??

bogie

17,106 posts

303 months

Thursday 2nd August 2007
quotequote all
yep - mine has just done the same...you can wiggle it a bit to get it up (oo-eer!)...download the workshop manual - theres instructions in there for taking the door apart and adjusting windows...I need to do mine at the weekend too

bogie

17,106 posts

303 months

Thursday 2nd August 2007
quotequote all
ps - also on the techwiki at SELOC there is a guide I think

hueandcry71

Original Poster:

1,389 posts

233 months

Thursday 2nd August 2007
quotequote all
bogie said:
yep - mine has just done the same...you can wiggle it a bit to get it up (oo-eer!)...download the workshop manual - theres instructions in there for taking the door apart and adjusting windows...I need to do mine at the weekend too
thanks, where do i download the manual from?

hueandcry71

Original Poster:

1,389 posts

233 months

Thursday 2nd August 2007
quotequote all
bogie said:
ps - also on the techwiki at SELOC there is a guide I think
There is thanks, just printed it off.

ptp170

277 posts

238 months

Thursday 2nd August 2007
quotequote all
http://www.chriskelsall.co.uk/ph/Window_Adjustment.jpg 
Loosen the offset cam at the end of the arm, wind the window up - the cam will move to the new position, then retighten!

hueandcry71

Original Poster:

1,389 posts

233 months

Thursday 2nd August 2007
quotequote all
bogie said:
yep - mine has just done the same...you can wiggle it a bit to get it up (oo-eer!)...download the workshop manual - theres instructions in there for taking the door apart and adjusting windows...I need to do mine at the weekend too
Just realised that all the guides refer to windy windows, mine are electric. Does this make any difference?

ptp170

277 posts

238 months

Thursday 2nd August 2007
quotequote all
Ummmm, don't really know....would have thought that the mechanism principals would have been the same....the only way to find out would be to remove the doorcard and have a look!!

hueandcry71

Original Poster:

1,389 posts

233 months

Thursday 2nd August 2007
quotequote all
ptp170 said:
Ummmm, don't really know....would have thought that the mechanism principals would have been the same....the only way to find out would be to remove the doorcard and have a look!!
Just been to pick the car up as i was having a few scuffs done on one of my wheels and the window has fixed itself. I will take the panel off at the weekend and see if anything needs tightening.
The job that they have done on the wheel is amazing, it is impossible to see where the scuffs were.