another question - HOW DO I REMOVE THE PASSENGER SEAT

[tnjjeffrey]

ok, there is bolt on the back right of the passenger seat that is just impossible to get undone. i cant get any tools in there and wonder how it was even done up as there is not adjustment on the seat???? its a s2, 2001 with touring pack (lumber support) its a allen key fitting just like the others. just i am trying to fit these heated seats and its turning into a long procedure! arrrr

[ModMan]

I took mine out earlier in the week. The recommended method is a wobble bar or a ball end allen key. I only had normal allen keys to hand and managed to get it undone 1/4 turn after done faffing. Then found a long flat screwdriver that happened to wedge in the top of the bolt (In where you should put the allen key) and then undid it that way. Took me longer to do that bolt than the other 3 and the other entire seat in total!

Patience is your friend.

[tricky 100]

^^Thats the way , long wobble bar with a hex bit in the end or long extension with a UJ on the end.

[Phil. S.]

This combo did it for me.

[tnjjeffrey]

awsum thanks so much for the pic, now i know wht you mean! gonna get a wobble bar tomoz! thanks

[boobles]

just remember that when you re-install the seat, put that difficult bolt in first! I know from experience that if you drop the bloody thing under the seat, you have to undo all of them & lift the seat out to reach the bolt.