Changing the throttle body S.1
Discussion
Put a 52mm throttle body on mine the other weekend and it was a sintch. The only awkward bit being the fixing bolt on the bottom nearest the engine as a) you can't see it and b) you need a small socket and extension bar to undo it, oh and c) when putting the bolt back in it holds the wiring loom bracket that you have to find blind. But really is very straight forward! The 52mm throttle body is 17% larger in air intake size then the 48mm one so has a better throttle response for smaller inputs. Some bloke with a Rover and a dyno did a like for like test that I found on the internet (MG Rover forum I think) and concluded that 52mm was better than the 48mm by 1BHP and 3-4ft/lb of torques. Conversely the bigger 56mm throttle body was worse than the 52mm so don't be tempted in biggest is best!
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff




