Discussion
Just went to go out in the car but when I swithced the ignition on nothing happened on the display. No warning lights, no fuel gauge etc. Car started ok but no rev counter or speedo either. Car is a 2008 Exige S PP. All was working fine about an hour ago and everything else is still working fine. Does the unit have its own fuse, doesn't appear to according to the handbook and all the fuses look ok anyway. Any ideas would be appreciated.
this happened to my 2008 elise apart from I was in the middle of a night run out in the country with the bolocs lot (not fun in the rain!)
mine needed a software update/reflash which took a couple of hours before I could pick it back up.
shouldn't be anything to serious just call the dealer - car is fine to drive just be careful of revs and speed
hth
Andy
mine needed a software update/reflash which took a couple of hours before I could pick it back up.
shouldn't be anything to serious just call the dealer - car is fine to drive just be careful of revs and speed
hth
Andy
Edited by Andy G Bmth on Friday 9th October 18:23
Mine did the same on the way to have the dash replaced because of the LCD failing in direct sunlight. It had a sick sense, I drove it to work OK. Then got in it to take it to the garage to be changed and absolutely nothing, no revs or speed or LCD, just the traction control light on. Strange thing is I was going to point this out to the garage and the bloody thing came back on!!
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff



