Blow off valve
Discussion
Good day.
Does anyone know of a simple kit to install that can be shipped to Canada that is affordable. I have been told that BOV for eclipse,talon etc. work fine on the esprit? Moderatly mechanicaly inclined, looks fairly straightforword with the right kit. Saw a kit on LEW, but by the time the exchange and shipping are looked after it seems a bit much although if nothing else comes up I may get it anyhow.
Thanks
Brad
89SE
Does anyone know of a simple kit to install that can be shipped to Canada that is affordable. I have been told that BOV for eclipse,talon etc. work fine on the esprit? Moderatly mechanicaly inclined, looks fairly straightforword with the right kit. Saw a kit on LEW, but by the time the exchange and shipping are looked after it seems a bit much although if nothing else comes up I may get it anyhow.
Thanks
Brad
89SE
Any twin piston dump valve will work on your esprit. The reason you need a twin piston one is because of the air flow meter. It prevents the car from stalling or uneven idle.
The tee piece is a simple silicone hose 60mm main (I think) to a 25mm tee. The only other pices you need is a few jubilee clips and a short length of 5mm silicone hose and 5mm plastic tee piece (from any aquarium shop or DIY) to tap into your vacuum pipe.
Cheers
Dave Walters
The tee piece is a simple silicone hose 60mm main (I think) to a 25mm tee. The only other pices you need is a few jubilee clips and a short length of 5mm silicone hose and 5mm plastic tee piece (from any aquarium shop or DIY) to tap into your vacuum pipe.
Cheers
Dave Walters
try dropping sanj an email, his address is here: http://turboesprit.tripod.com/
I bought mine from him, dont remember the price but its a great kit identical to the motoconcept kit.
I bought mine from him, dont remember the price but its a great kit identical to the motoconcept kit.
i put together one from www.forgemotorsport.com that works great. it is a diaphram BOV that i plumbed back to the airbox. the silicone tee is a samco part. if you want part #s and pics of my installation, send me your email. total cost was about $230 including shipping.
chris
chris
Gassing Station | Esprit | Top of Page | What's New | My Stuff




