windshield wiper coverage area
windshield wiper coverage area
Author
Discussion

teigan

Original Poster:

866 posts

254 months

Wednesday 22nd November 2006
quotequote all
my wiper blades don't get everywhere. most distressing is one lower corner, for me on the driver's side. can that adjustment be made without the blade crashing at the other extreme?

judgea

100 posts

261 months

Monday 27th November 2006
quotequote all
teigan, don't you have a G-type? On mine, I went to auto zone and purchased a blade longer than the factory blade. I BELIEVE it was a 26", but don't rely on my memory. Anyway, works fine, does not crash into anything, and increased the coverage area. Bring your blade (and blade housing) into your local parts store and increase the length.

teigan

Original Poster:

866 posts

254 months

Tuesday 28th November 2006
quotequote all
i'll try that. thanks. it's the lack of lower reach that's the potential visibility hazard.

teigan

Original Poster:

866 posts

254 months

Tuesday 5th December 2006
quotequote all
i bought and installed a longer blade, but the arm length is what really could use lengthening. there's about a 4 inch wide column of dew, which i have to wipe clear by hand from the driver's side edge of the windscreen.

wedg1e

27,001 posts

285 months

Tuesday 5th December 2006
quotequote all
Ah, just drive a bit quicker, that'll clear it

teigan

Original Poster:

866 posts

254 months

Tuesday 5th December 2006
quotequote all
can i also use that method for clearing fires in the engine compartment?

wedg1e

27,001 posts

285 months

Wednesday 6th December 2006
quotequote all
teigan said:
can i also use that method for clearing fires in the engine compartment?


Don't be ridiculous, that'll fan the flames.
Just open the tailgate and throw a can of petrol over it. The sudden ingress of liquid will snuff out the fire