Obvious answer??
Discussion
Bike shop replaced front derailleur cable after my botched bike mechanic efforts...
However, rear gear change been getting progressively worse since. Suspected potential contamination in cables from riding in rubbish weather.
Inspected bottom bracket today and found shop has put both front and rear cables through the same channel in bottom bracket. Appears at least one has shed parts of the cable covering. Suspect this to source of problem.
My view would be there are two guide channels for a reason and putting the two together will cause pressure and friction and therefore not something you’d actually do.
Before contacting shop, would this be the general consensus?

Both cables on left (bottom) channel on this photo.
However, rear gear change been getting progressively worse since. Suspected potential contamination in cables from riding in rubbish weather.
Inspected bottom bracket today and found shop has put both front and rear cables through the same channel in bottom bracket. Appears at least one has shed parts of the cable covering. Suspect this to source of problem.
My view would be there are two guide channels for a reason and putting the two together will cause pressure and friction and therefore not something you’d actually do.
Before contacting shop, would this be the general consensus?
Both cables on left (bottom) channel on this photo.
Gassing Station | Pedal Powered | Top of Page | What's New | My Stuff


