Bottom Bracket upgrades

[GT3cs]

Bottom bracket replacement time again . Colnago V3 SRAM Dub . Considering upgrading the wheels manufacturing unit . Anyone have experience moving from a standard BB to wheel s Manufacturing ?

[markcp]

I used a Wheels Manufacturing bb on a Parlee PF30 frame and it was faultless for the 5 years of use and still buttery smooth when I removed it. Its a great design if there are any imperfections in the bb alignment as the cups thread together so you're not reliant on the friction fit of the cups.

[gmackay2]

Not used a wheels manufacturing one, but used Token bb's for years with the same screw together fitment. Except I swap out the bearings for Enduro ones and they last for ages as well as providing a nice smooth rotation with the cranks.

More recently i bought a ZTTO one from Aliexpress with ceramic bearings for £15, wore the driveside bearing out in under 600 miles on my gravel bike, but again swapped the bearings to Enduro ones, and it is silky smooth again.