Shimano Tiagra - Adjusting/repairing
Shimano Tiagra - Adjusting/repairing
Author
Discussion

Sortie 10

Original Poster:

744 posts

281 months

Sunday 3rd October 2010
quotequote all
Can anyone point me in the direction of instructions as to how to re-index my rear derailleur? Rather unhelpfully the tech docs pages of the Shimano website are off line at present.

I would like to try basic fixes before going to the expense of renewing components (which may be nearing the end of their life after 7500 miles).

Many thanks for any advice.

Ninjaboy

2,525 posts

279 months

Sunday 3rd October 2010
quotequote all
I think it used to be put it in the second smalllest sprocket on the rear and tighten the cable on the rear derailure adjustment until is just tries to ride up unitl the next gear. When that happens back off the cable tension until the noise stops.

Edited by Ninjaboy on Sunday 3rd October 14:07

a boardman

1,316 posts

229 months

Sunday 3rd October 2010
quotequote all
I was watching this video

http://www.youtube.com/watch?v=SkzvfCaIbyQ

dont know if it is correct,

Sortie 10

Original Poster:

744 posts

281 months

Sunday 3rd October 2010
quotequote all
Many thanks to both of you, particularly a boardman - I will give this a try with laptop at hand so I can watch the video as I work (it may take me 10 times longer but I will get it right in the end!)

anonymous-user

83 months

Sunday 3rd October 2010
quotequote all
the "how to" guides on the park tools website are brilliant.

failing that, put the chain on the little chainring, push it on to the biggest sprocket with your hands and adjust accordingly using the "l" screw to get movement down to 6 or 7.
then repeat with the chain on the largest chainring, push the chain with your hands again into the smallest sprocket and adjust with the "h" screw to go from 9 to about 3.

you shouldnt be using the small sprockets with the small chainring and big sprockets with big chainrings and only voodoo witchcraft could get the rear sprockets working well in both/three chainrings...

Parrot of Doom

23,075 posts

263 months

Monday 4th October 2010
quotequote all
First things first, you should buy a chain wear indicator and measure your chain.

itsnotarace

4,685 posts

238 months

Monday 4th October 2010
quotequote all
Sortie 10 said:
I would like to try basic fixes before going to the expense of renewing components (which may be nearing the end of their life after 7500 miles).
Almost certainly worn chain and rear cassette like the man above said. Replace both at the same time.