M3 Too loud with milltek???

[Dan Kirk]

A few of us are going to donnington on 10th and have been told that they are extremley strict when it comes down to the 98db limit.

My e46 m3 has an milltek rear box and csl cats does anyone have a similar set up and know how loud that is??

Also going are evo - 580bhp surely too loud??

996 c4 standard?

04 sti re-map and milltek?

Cerbera 4.2 with decat pipes also surely too loud?

Any input would be much appreciated.

Dan

[batphink]

You're all f*cked!

;)

[Pistonmike]

yep hes right.lol
good luck

[Vixpy1]

Think you might be ok with the M3 and Milltek, from what i remember they are not too loud.

[boma]

think it's done from a driveby reading at donny, at the first buildings on your left down the home straight to goddards iirc. back off a little and you might get away with it

[pikeyboy]

boma said:

think it's done from a driveby reading at donny, at the first buildings on your left down the home straight to goddards iirc. back off a little and you might get away with it

think you'll find that trick wont work, read other threads about donnignton on here!

[boma]

found it:

http://pistonheads.com/gassing/topic.asp?h=0&t...

ow, not good

[bromers2]

M3 will be fine - mine (CSL) with cats and Milltek runs at 92db static, std runs at 89db static. Induction noise can be an issue

IMHO TVR won't make it.

Rick

[shim]

Agree CSL should be ok. I know guys running 100 cell cats and full Milltek at Bedford ewhich is even stricter and getting away with it.

You cna give your mates passenger rides!