Anglessy 23rd August
Discussion
WEREWOLF said:
Is the pug standard or modded?
Modded a short list,Engine-
1.9 8v twin 45s high compression- just helps torque really.
Pipercross airbox
Suspension/steering-
Gaz suspension all around- Upper / Lower strut braces
Rose jointed arms running 1.7 degrees negative camber
Rear standard 1.9 beam 1 degree negative
Brakes-
Uprated discs with ds3000 pads braided lines all around and green pads on the rear. Ap racing brake fluid.
Body/Interior-
Fully stripped buckets /harnesses
10 point Fia Roll Cage
Polycarb windows all around
Aluminium roof plate instead of sunroof- saves weight adds to the stiffness of the car
Fibreglass Bonnet
Brake air duct to aid cooling on long stints.
Tyres- r888's-damp/drycold conditions , Michelin slicks S9's-dry and khumos softs for the wet.
Theres probably more that i've forgotten to add
. Thanks
Phil
Anglessy virgin.
Got some mates driving gt3`s so should enjoy hustling them through the twisty stuff.
You think your bonnet`s bad mine looks like Basil Fawlty has whipped it to within an inch of it`s life with a hammer.
Looks like a few pugs will be there so should be good fun.Fingers crossed for sunshine.
Got some mates driving gt3`s so should enjoy hustling them through the twisty stuff.
You think your bonnet`s bad mine looks like Basil Fawlty has whipped it to within an inch of it`s life with a hammer.
Looks like a few pugs will be there so should be good fun.Fingers crossed for sunshine.
Gassing Station | Track Days | Top of Page | What's New | My Stuff



