Screw for the side of OEM seat?

[Conor D]

I was in the middle of doing the foam removal from the seat (which is a good job once done..) but the screw connecting the bottom and top part of the seat wasn't moving. In the end the head got a bit butchered, but I didn't want to drill it out incase I couldn't get a replacement.

I just took foam out of the base, but want to do the back too. Can these screws be got? It's a Phillips screw that seems to have a washer attached to it?

[Mr MXT]

What are the chances? I was speaking to Jonny Westside yesteday about these as I need a pair. I've asked him to order me a couple, you might be able to jump in on that action if you ask him nicely?

Be aware they are some funky JIS jap spec thread, so if you put a "normal" bolt in, you'll ruin the thread.

[JonnyFive]

y0!

I'm having a look for these today at work for MXT so will reply in here with cost/availablity.

[JonnyFive]

Is it that bolt you need?

[Rocketman105]

JonnyFive said:

Is it that bolt you need?

I want to know what the Knuckle(r) is!

[Mr MXT]

Westside - I need the two on the other side of the seat, behind the cover. I cant make out the part number.

[JonnyFive]

Mr MXT said:

Westside - I need the two on the other side of the seat, behind the cover. I cant make out the part number.

Ah ok.. These ones;



Or these?



And the knuckle is this thing;

[Mr MXT]

Off the top of my head I'm not sure mate, so lets say all three

[JonnyFive]

The bolts in picture two are just screws to hold the cover on that covers the reclining (Knuckle thing) part.. I reckon its the ones in picture 1

How many.. 2?

[Conor D]

JonnyFive said:

Is it that bolt you need?

Yea, that looks like it. How much do they cost?

Does anyone have any advice about how to go at the one that has the butchered head?

[JonnyFive]

£3.23 including VAT and free postage.

Its 10% discount over Mazdas Retail price

But, they're on back order.. I'd say 4-5 days delivery, maybe slightly longer..

[Mr MXT]

I'll check when I get home jonlar.

[Mr MXT]

^ Those two for me mate.

Apologies for the SLIGHT thread hijack!