MK2.5 Lights no longer flash on remote locking??
Discussion
Ah, this is a good one, and had me stumped for a while when it happened to me!
Under the bonnet on the RH side is a push button sensor that the bonnet comes down on when it closes, it is covered by a rubber ribbed boot. This switch completes the alarm arming sequence (or something).
Sometimes when people are opening and slamming the bonnet a lot the metal bracket this switch sits on gets a bit bent so doesn't "arm" when bonnet is closed. So just bend the bracket back up a couple of mm
Hope that sorts it!
Under the bonnet on the RH side is a push button sensor that the bonnet comes down on when it closes, it is covered by a rubber ribbed boot. This switch completes the alarm arming sequence (or something).
Sometimes when people are opening and slamming the bonnet a lot the metal bracket this switch sits on gets a bit bent so doesn't "arm" when bonnet is closed. So just bend the bracket back up a couple of mm

Hope that sorts it!
designforlife said:
Ah, this is a good one, and had me stumped for a while when it happened to me!
Under the bonnet on the RH side is a push button sensor that the bonnet comes down on when it closes, it is covered by a rubber ribbed boot. This switch completes the alarm arming sequence (or something).
Sometimes when people are opening and slamming the bonnet a lot the metal bracket this switch sits on gets a bit bent so doesn't "arm" when bonnet is closed. So just bend the bracket back up a couple of mm
Hope that sorts it!
10 points that man, cheers that saved me hours of headaches, sensor bent down about 10mm from usual position.Under the bonnet on the RH side is a push button sensor that the bonnet comes down on when it closes, it is covered by a rubber ribbed boot. This switch completes the alarm arming sequence (or something).
Sometimes when people are opening and slamming the bonnet a lot the metal bracket this switch sits on gets a bit bent so doesn't "arm" when bonnet is closed. So just bend the bracket back up a couple of mm

Hope that sorts it!
Gassing Station | Mazda MX5/Roadster/Miata | Top of Page | What's New | My Stuff


