Fast road settings

[phil_cardiff]

Anyone got the WiM fast road settings available? Feel cheeky calling them up and asking for them knowing that I'll not be paying them any money.

[seismic22]

I could really do with these too for standard shocks and springs. Its not really feasible for me to drive all the way to WIM and back when i live down in North Devon/Cornwall and have someone with a hunter alignment machine just round the corner!

[MX-5 Lazza]

Just ask him! He'll happily give you the settings and will even recommend somewhere near you to get it done if he can

[phil_cardiff]

I suppose I'll have to. Call me weird but I don't like getting something for free.

[MX-5 Lazza]

It's only settings - it's not like he's losing business by giving them to you

[roddo]

Give me a call and I'll advise you on settings.......................

You could say I've done one or two.....

Paul 07770 566599

[Evangelion]

I Googled it once and as far as I can remember, it's:

caster: max available, 4.5deg or more.
front camber: -1.0deg
front toe-in: 0 to 1/16 in
rear camber: -1.5deg
rear toe-in: 0 to 1/16 in


ETA - does anyone have the track settings?

Edited by Evangelion on Tuesday 7th September 20:03

[skinny]

they are pretty reasonable settings but tony modifies his to adjust with ride height i believe.

[Salgar]

roddo said:

Give me a call and I'll advise you on settings.......................

You could say I've done one or two.....

Paul 07770 566599

All I'll say is that your name is incredibly similar to mine.

[vrsmxtb]

Can anyone comment on the settings below, this is what I came away from an alignment with today. Everything was in the green on a fast road hunter setting but the values don't seem balanced, especially the cambers?

Front
Left camber 0.08
Right camber -0.13
Left caster 5.03
Right caster 5.15
Left toe 0.02
Right toe 0.01

Total toe 0.02
Steer ahead 0.00

Rear

Left camber -1.27
Right camber -2.09
Left toe 0.17
Right toe 0.16
Total toe 0.32

Thrust angle 0.00

[skinny]

this is *after* alignment!? i wouldn't be over the moon with these numbers - esp rear camber. front camber is also pretty bad - one +ve, one -ve!? they should both be -ve and a little higher than that.

was it done with a large weight in the drivers seat or something?