Difficult to get/ useful bits from scrapped car?

[Jerwatt]

There's a Mk2 MX-5 which has been crashed here and is being sold for pieces. Is there any parts that are worth getting hold of, which are either hard to get or expensive? I was thinking I might ask for the clips for the main headlight bulbs, as I've read sometimes these break but are not sold seperately. Basically is there similar things I should try and get? As there are not so many cars here I would imagine it's more difficult to get cheap 2nd hand parts, which is why I was thinking of getting anything I might need now.

[MonkeyArmDealer]

Jerwatt said:

There's a Mk2 MX-5 which has been crashed here and is being sold for pieces. Is there any parts that are worth getting hold of, which are either hard to get or expensive? I was thinking I might ask for the clips for the main headlight bulbs, as I've read sometimes these break but are not sold seperately. Basically is there similar things I should try and get? As there are not so many cars here I would imagine it's more difficult to get cheap 2nd hand parts, which is why I was thinking of getting anything I might need now.

In terms of oily bits I have no idea at all...

However, it might be worth having a hunt around your car for missing bits where you wouldn't normally look - you might find you need more than you think! (eg, sun visor screws, seat belt post covers etc)

[roverspeed]

Piston caliper carriers to be sold for 1.6 to 1.8 brake conversions.

Or take em off and give them to me

[MX-5 Lazza]

roverspeed said:

Piston caliper carriers to be sold for 1.6 to 1.8 brake conversions.

Or take em off and give them to me

Did you check Jewatts location? Postage might cost a fair bit

[Jerwatt]

As well as the bits themselves. Everything is more expensive here, so I doubt it'd be worth the cost of buying here compared to the UK too! Why most people over here buy from the UK/ States/ Germany and import it, as long as it's not too bulky/ heavy.