tell me about rolex daytonas, waiting list etc
tell me about rolex daytonas, waiting list etc
Author
Discussion

jonah35

Original Poster:

3,940 posts

188 months

Sunday 2nd September 2012
quotequote all
I'm not 'into' watches as most of you knowledgeable chaps are but please can you tell me the following

a chap told me a stainless daytona lists at £7950 and there is a long waiting list. Why then can you look on loads of watch sites and see them for between £7 and £8k? How does this happen?

Secondly, surely a bimetal daytona should be more than a stainless but they're not that much more - perhaps a few hundred quid second hand. Why is this?

Given a solid gold daytona is MUCH dearer than a bimetal, why is this if a stainless is similar priced to a bimetal but the all gold one is much dearer than a bimetal?

what is the most desirable watch face colour?

if buying a stainless daytona second hand, obviously a relatively recent one (2003 to present ish) are there any years that are more desirable than others and ones to avoid?

thanks

raceboy

13,940 posts

311 months

Sunday 2nd September 2012
quotequote all
Lots Daytona stuff in here.....

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

I've not really been keeping that close an eye on prices, but the basic history is that 10 years ago a new s/s Daytona was just over £3k new but had a 5+ year waiting list, so everyone wanted one, and to avoid the wait some people would pay double, you could put your name down on the list, wait, then flip the watch for double the money the day you picked it up, roll forward a few years the new price has increased to over £7k and the 2nd hand price has pretty much stayed the same, so now there is a much shorter wait as the 'investors' have pulled out as there is no money to be made.
The Gold/Bimetal has never had the same wait/premium so 2nd hand prices have always been lower than new, and in some cases lower than an s/s watch.

jshell

12,116 posts

236 months

Monday 3rd September 2012
quotequote all
jonah35 said:
I'm not 'into' watches as most of you knowledgeable chaps are but please can you tell me the following

a chap told me a stainless daytona lists at £7950 and there is a long waiting list. Why then can you look on loads of watch sites and see them for between £7 and £8k? How does this happen?

Secondly, surely a bimetal daytona should be more than a stainless but they're not that much more - perhaps a few hundred quid second hand. Why is this?

Given a solid gold daytona is MUCH dearer than a bimetal, why is this if a stainless is similar priced to a bimetal but the all gold one is much dearer than a bimetal?

what is the most desirable watch face colour?

if buying a stainless daytona second hand, obviously a relatively recent one (2003 to present ish) are there any years that are more desirable than others and ones to avoid?

thanks
Are you looking for one, or is it just for interest?

SprintSpeciale

432 posts

176 months

Monday 3rd September 2012
quotequote all
This is what I read somehwhere.

Originally, Rolex didn't make many plain steel Daytonas because they only produced so many movements a year and there was more margin putting the movements in the bling stuff - gold, mother of pearl faces, diamond encrusted, etc.

The rarity made the steel watches more sought after, so the second hand prices went up.

Eventually Rolex got fed up of seeing the resellers make a killing and pushed the price up. That made the steel ones "overpriced" in the sense that the margin Rolex then made was disproportionately high, but the market had already established the price people were prepared to pay. Of course, once there is no profit to be paid, the resellers disappear, the waiting lists free up and it becomes easier to get one in the first place..


I think Rolex also increased production numbers, which obviously shortens the list, too.

No doubt, people who actually know what they are talking about will be along soon to correct me.

jonah35

Original Poster:

3,940 posts

188 months

Monday 3rd September 2012
quotequote all
jshell said:
Are you looking for one, or is it just for interest?
Maybe one day!

hilly10

7,543 posts

259 months

Monday 3rd September 2012
quotequote all
SprintSpeciale said:
This is what I read somehwhere.

Originally, Rolex didn't make many plain steel Daytonas because they only produced so many movements a year and there was more margin putting the movements in the bling stuff - gold, mother of pearl faces, diamond encrusted, etc.

The rarity made the steel watches more sought after, so the second hand prices went up.

Eventually Rolex got fed up of seeing the resellers make a killing and pushed the price up. That made the steel ones "overpriced" in the sense that the margin Rolex then made was disproportionately high, but the market had already established the price people were prepared to pay. Of course, once there is no profit to be paid, the resellers disappear, the waiting lists free up and it becomes easier to get one in the first place..


I think Rolex also increased production numbers, which obviously shortens the list, too.

No doubt, people who actually know what they are talking about will be along soon to correct me.
Sounds spot on to me

CommanderJameson

22,096 posts

257 months

Tuesday 4th September 2012
quotequote all
Ridiculously large amount of money for a dateless sports chrono with an unremarkable (although very well-made) movement, IMHO.

But hey, if the market says "TAKE MY MONEY, ROLEX! TAKE MY MONEY, GOD DAMN YOUR EYES!", who am I to argue?

erics

2,721 posts

242 months

Tuesday 4th September 2012
quotequote all
you can easily get yourself a very nice 2nd hand daytona in stainless steel for 5.5k-6k. Wating list BS was true 5 years ago. Nothing at all now. You should even get a discount from a main dealer. Just search a bit and open your eyes.
Rolex 'new' prices have gone VERY silly over the past 2-3 years.

jonah35

Original Poster:

3,940 posts

188 months

Tuesday 4th September 2012
quotequote all
Where do you get them for £5500?

Also, what kind of watches are likely to be a reasonable investment? Obviously not tank 50 percent come sale time?

bobbybee

889 posts

185 months

Wednesday 5th September 2012
quotequote all
Any SS professional series Rolex available from an AD with a discount?
I'm not saying people can't get these great deals, but I've never been privileged enough for it happen to me frown

And most I've seen at list or below are usually bi-metal, or SS but 4-5 years old. some nearly new I have seen are a good £500 over list.

Not that I care as I have one anyway, just saying that's all

jshell

12,116 posts

236 months

Wednesday 5th September 2012
quotequote all
erics said:
Wating list BS was true 5 years ago. Nothing at all now. You should even get a discount from a main dealer.
bks, the grey dealers are still offering 'list' for new ones!

Fittster

20,120 posts

244 months

Wednesday 5th September 2012
quotequote all
SprintSpeciale said:
Originally, Rolex didn't make many plain steel Daytonas because they only produced so many movements a year and there was more margin putting the movements in the bling stuff - gold, mother of pearl faces, diamond encrusted, etc.
I thought Zenith made the movement until fairly recently?