Gold bar question
Discussion
As there isn't a Jewellery forum....
I'm in the market for a wedding ring, I fancy 18kt yellow gold: a simple affair- 6mm, 'D' profile with a millgrain edge, size S1/2. I'm being quoted £7-800 based on about 9g of gold. I'm not a fan of platinum.
I have a 10g bullion bar of 99.9% pure gold (so 24ct) which resulted from a drunken spending spree some time ago.
Before I make myself look daft with the jeweller- can 24ct be used for jewellery or is it too soft? Would they have to mix it with an alloy? Also, does anyone have any idea how much it would cost to get the ring made from the bar?
(I say 'gold bar' but it's more like an oxo cube!)
I'm in the market for a wedding ring, I fancy 18kt yellow gold: a simple affair- 6mm, 'D' profile with a millgrain edge, size S1/2. I'm being quoted £7-800 based on about 9g of gold. I'm not a fan of platinum.
I have a 10g bullion bar of 99.9% pure gold (so 24ct) which resulted from a drunken spending spree some time ago.
Before I make myself look daft with the jeweller- can 24ct be used for jewellery or is it too soft? Would they have to mix it with an alloy? Also, does anyone have any idea how much it would cost to get the ring made from the bar?
(I say 'gold bar' but it's more like an oxo cube!)
Vvroom said:
Before I make myself look daft with the jeweller- can 24ct be used for jewellery or is it too soft?
I have a 24ct wedding ring, so Yes they can be used as jewellery. I bought my wife's engagement ring in 24ct and was then told that hew wed ring would have to be the same ct or the lower ct ring would abrade the higher. I got mine to match hers. I can turn the 24ct to 18ct if you need (by standard mixing process), and make your wedding band to suit. Solve the problem?
Note: Your 24ct, 10g lump wouldnt produce a 9g 24ct band as you have to allow for waste in the melt, filings during creation and finally polishing losses. Ideally you need to start with at least a 50% excess to allow for all this.
Note: Your 24ct, 10g lump wouldnt produce a 9g 24ct band as you have to allow for waste in the melt, filings during creation and finally polishing losses. Ideally you need to start with at least a 50% excess to allow for all this.
ecain63 said:
I can turn the 24ct to 18ct if you need (by standard mixing process), and make your wedding band to suit. Solve the problem?
Note: Your 24ct, 10g lump wouldnt produce a 9g 24ct band as you have to allow for waste in the melt, filings during creation and finally polishing losses. Ideally you need to start with at least a 50% excess to allow for all this.
Very interesting, I hadn't appreciated the amount of wastage. Note: Your 24ct, 10g lump wouldnt produce a 9g 24ct band as you have to allow for waste in the melt, filings during creation and finally polishing losses. Ideally you need to start with at least a 50% excess to allow for all this.
Indication of the price doing as you suggest?
Vvroom said:
ecain63 said:
I can turn the 24ct to 18ct if you need (by standard mixing process), and make your wedding band to suit. Solve the problem?
Note: Your 24ct, 10g lump wouldnt produce a 9g 24ct band as you have to allow for waste in the melt, filings during creation and finally polishing losses. Ideally you need to start with at least a 50% excess to allow for all this.
Very interesting, I hadn't appreciated the amount of wastage. Note: Your 24ct, 10g lump wouldnt produce a 9g 24ct band as you have to allow for waste in the melt, filings during creation and finally polishing losses. Ideally you need to start with at least a 50% excess to allow for all this.
Indication of the price doing as you suggest?
niacuk@yahoo.co.uk or call me on 07780457543 at work.
Gassing Station | Watches | Top of Page | What's New | My Stuff




