Strap/bracelet removal/adjustment tools?
Strap/bracelet removal/adjustment tools?
Author
Discussion

pstruck

Original Poster:

3,549 posts

280 months

Friday 7th September 2012
quotequote all
Can anyone tell me what I might need by way of tools for releasing spring bars and removing bracelet links? I know there are different types of both, but is there a cheapish kit of generic tools which you might recommend and would make a good purchase?

Shaw Tarse

31,904 posts

234 months

Friday 7th September 2012
quotequote all
How cheap?

GCH

4,142 posts

233 months

Friday 7th September 2012
quotequote all
Bergeon 6767F is what you need for spring bars (also works on some links)

Wont break the bank either

pstruck

Original Poster:

3,549 posts

280 months

Friday 7th September 2012
quotequote all
I don't know. I don't need professional quality tools as they will only be used very occasionally. I'm assuming there is a wide variety of prices and quality.

Basil Brush

5,640 posts

294 months

Friday 7th September 2012
quotequote all
I just bought one of these to adjust the strap on my new Speedmaster. I modified it a bit by covering the contact surfaces with alcantara to stop it scratching anything and it worked a treat.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&am...

daveenty

2,385 posts

241 months

Friday 7th September 2012
quotequote all
GCH said:
Bergeon 6767F is what you need for spring bars
THE tool. End of conversation really.

The cheap Amazon kits have a couple of good bits in them (Hammer + heavy pin remover) but if you want reliability, go for Bergeon stuff.

Shaw Tarse

31,904 posts

234 months

Saturday 8th September 2012
quotequote all
I bought one of the cheapo eBay kits, for what I need, it's done ok (though I've added a lump of blutac)

Nick M

3,632 posts

254 months

Sunday 9th September 2012
quotequote all

Was recommended the Bergeon tool on here recently and yes, it is very good.

The stainless steel end pieces look much more robust than the cheap one I saw in Maplin, and you can buy one 'holder' and then get different 'tools' to screw in the end.

Various places on line, and I paid about GBP 15.00 for mine with an extra tool.

Riff Raff

5,462 posts

226 months

Sunday 9th September 2012
quotequote all
daveenty said:
GCH said:
Bergeon 6767F is what you need for spring bars
THE tool. End of conversation really.

The cheap Amazon kits have a couple of good bits in them (Hammer + heavy pin remover) but if you want reliability, go for Bergeon stuff.
I like the 6111 too. The fat end works a treat on straps that are new with no give in them.

Sometimes you need two springbar tools (and three hands) for some bracelets I've had.

andy tims

5,606 posts

277 months

Monday 10th September 2012
quotequote all
GCH said:
Bergeon 6767F is what you need for spring bars (also works on some links)
The "F" fork works well for bracelets. The regular fork is much better for straps.

http://www.watchtool.co.uk/bergeon-6767-spring-too...

For those annoying push pins that are often used for bracelet links I have an A&F Swiss Bracelet Pin Remover.

You should also get a set of screwdrivers.