accuracy - how important is it?
Discussion
Few would argue about the intrinsic beauty of a good quality clockwork watch. But remembering the prime function of a timepiece, I'm Just wondering how much importance folk attach to accuracy? What are acceptable margins? Do you have higher expectations of accuracy for more expensive watches, or is there no correlation between accuracy and price?
As a general rule I set all my watches ten minutes fast. Because I HATE being late for anything. 
For a more accuate time I'd look at my mobile phone - i.e. if wanting to check I really do have X minutes to still make my train/meeting etc.
Generally, I don't expect or desire terifically accurate timekeeping from my wristworn timepieces.

For a more accuate time I'd look at my mobile phone - i.e. if wanting to check I really do have X minutes to still make my train/meeting etc.
Generally, I don't expect or desire terifically accurate timekeeping from my wristworn timepieces.
irrelevant of price and name, and Swiss movement with a COSC rating has to be (at time of test) -4/+6 seconds accuracy per day.
which is more that enough for most I would guess.
It does also depend on how you wear a mechanical watch, how it is stored when not worn, wound regularly etc. etc. There are many factors which can effect accuracy.
Although I have a Rolex Daytona, and no matter how I wear it, or store it it have never been out more than 0.25 seconds a day, pretty damn good for a wind-up!
which is more that enough for most I would guess.
It does also depend on how you wear a mechanical watch, how it is stored when not worn, wound regularly etc. etc. There are many factors which can effect accuracy.
Although I have a Rolex Daytona, and no matter how I wear it, or store it it have never been out more than 0.25 seconds a day, pretty damn good for a wind-up!
Blackpuddin said:
Which of the classic/big-name Swiss movements has the best reputation for accuracy? Are modern movements always better than older ones?
I've been very impressed (and not a little surprised to be honest) with the accuracy of my 809 Breitling Cosmonaute. Aside from when it's stopped (I try and keep it wound all the time - not sure that's a good idea, actually, but probably best for another thread), I've not had to adjust it at all.
My much newer (1861) Speedmaster Pro seems to run a little fast, certainly more than seconds per day, but probably less than a minute.
M.
I had a Sinn that ran to within 1 second a week, that had an ETA movement.
However, I'm pretty confident that any decent (and not broken) mechanical movement can be made to run within COSC specs, all it needs is some time and care from a competent watchmaker to regulate it appropriately.
However, I'm pretty confident that any decent (and not broken) mechanical movement can be made to run within COSC specs, all it needs is some time and care from a competent watchmaker to regulate it appropriately.
Naerly everything I own is well under 20 secs a day - if it was over then I'd think about getting them 'fixed'. My worst one is my tourbillon about 15-20 secs, but thats fast which is better than slow.
When they get beyond a 1-2 mins out I adjust them.
however as i tend to wear a watch for a week, mthey never really never get to the point where I have to adjust them.
When they get beyond a 1-2 mins out I adjust them.
however as i tend to wear a watch for a week, mthey never really never get to the point where I have to adjust them.
On my current shopping list is something that is accurate to within 20 sec/year without going atomic. There are a handful of watches from the late 70s and early 80s that are this accurate, but the fact such accuracy is not available these days would suggest there's not much demand for that level of accuracy.
Most quartz watches are in the range 15-30 secs per month. Temperature has the biggest influence on running speed and many have a sweet spot around 25-30 deg c where they will do a lot better. The Citizen 4 mhz and Omega marine chronometer used a different cut of quartz crystal and a higher frequency to make them v accurate. Some Seikos used 2 different quartz crystals running at different frequencies to compensate for temperature changes. I know the new Omega Z33 is thermo compensated quartz, but not sure how or how accurate it is?
None of my watches are COSC-certified, but all 4 autos are within 7 sec/day. The best (Ball Fireman II) is well within COSC parameters at a steady +1sec/day. Is accuracy important? I'm not bothered as long as I'm running within a minute or so of the correct time on whichever watch I'm wearing. At work if timing is mission-critical we'll synchronise watches with a time-hack anyway.
There's a phrase that sticks in my mind - "the world runs by Artillery time"...
It was certainly important for those on the ground when shells were landing
These days time is also important as I get involved in rallying and one significant event was won by 1/10 second recently.
Having said that I've got a couple of automatics which wouldn't be allowed to time an event these days by they are things of beauty
It was certainly important for those on the ground when shells were landing

These days time is also important as I get involved in rallying and one significant event was won by 1/10 second recently.
Having said that I've got a couple of automatics which wouldn't be allowed to time an event these days by they are things of beauty

Gassing Station | Watches | Top of Page | What's New | My Stuff



