Discussion
Not a new subject I'm sure, but any help apreciated........
I have a 1987 Bi Metal GMT 2 (16713), and worn it every day since new. The head is a bit marked but still works perfectly (not been opened for over 10 years), but the strap is now very worn, and the clasp keeps coming apart in the middle hinge. The metal on the hinge is so soft I can reclose it and put it back together with my nail ! The links are really loose, but intact.
I like originality and was wondering can the strap be refurbed, or do I have to get a new strap. Where do I get one if needed without paying the earth. Or who can fix my strap. I could live with a good S/Hand strap if they are about.
I'm not that into the whole watch thing, its the only watch I have, but I really like the GMT. One thought was maybe sell it - I know some of the older ones can be collectable, is this one of them ? would it get me a younger/better condition sub or GMT
Thanks for any help.
I have a 1987 Bi Metal GMT 2 (16713), and worn it every day since new. The head is a bit marked but still works perfectly (not been opened for over 10 years), but the strap is now very worn, and the clasp keeps coming apart in the middle hinge. The metal on the hinge is so soft I can reclose it and put it back together with my nail ! The links are really loose, but intact.
I like originality and was wondering can the strap be refurbed, or do I have to get a new strap. Where do I get one if needed without paying the earth. Or who can fix my strap. I could live with a good S/Hand strap if they are about.
I'm not that into the whole watch thing, its the only watch I have, but I really like the GMT. One thought was maybe sell it - I know some of the older ones can be collectable, is this one of them ? would it get me a younger/better condition sub or GMT
Thanks for any help.
The clasp on the bracelet has now broken in two. The rest of the bracelet is really worn. I have been offered a genuine used replacement bracelet today by a well known dealer on Merseyside (who I bought my wifes almost new midi 18k Yacht Master from) (taking my old bracelet in px), but no price has been mentioned yet (I sent mine to them today). What is a reasonable price for a tight original bracelet ?
Also, if I took the head to St. James Rolex centre, and had a good service, new bezel insert, and had all the scratches on the case taken out (ie a full recon), what sort of bill could I expect and what sort of turnaround time. (I assume I should not go to the local non Rolex, Rolex repairer)
Many thanks for the information.
Also, if I took the head to St. James Rolex centre, and had a good service, new bezel insert, and had all the scratches on the case taken out (ie a full recon), what sort of bill could I expect and what sort of turnaround time. (I assume I should not go to the local non Rolex, Rolex repairer)
Many thanks for the information.
A new s/s Oyster bracelet is 850 EUR when bought new. A steel/gold one will be more expensive.
In any case: keep the watch. Keep the watch. Even a new one needs servicing.
A 1987 model year GMT will have a plastic glass, maybe even slightly domed. These are collectible. Dont trade it in for one of the modern ones.
Lets say the whole refurb with parts will cost you 1500 GBP. You will use the watch for another 20 years. Write off the servicing costs over 20 years and dont worry about it anymore.
In any case: keep the watch. Keep the watch. Even a new one needs servicing.
A 1987 model year GMT will have a plastic glass, maybe even slightly domed. These are collectible. Dont trade it in for one of the modern ones.
Lets say the whole refurb with parts will cost you 1500 GBP. You will use the watch for another 20 years. Write off the servicing costs over 20 years and dont worry about it anymore.
Edited by Rushmore on Saturday 19th January 11:07
Which bracelet do you have, the Oyster or the Jubilee? With regard to clasp, this can be replaced for both bracelet options. The worn bracelet however is different proposition. In both variants (Oyster and Jubilee)the centre gold links are the load bearing parts. If worn loosely these will stretch over a period of time, which then allows the bracelet to flex laterally accelerating the wear process, which I guess is where you are now. You can ask Rolex about the cost of re-furbing the bracelet (if they still do it) when you get tender the watch for a service estimate (likely to be >£400).
As suggested, a new bracelet could well be towards £2000 or more (not certain, haven't checked in years). There's a mint example on ebay that would be the correct variant for the 16713(which has a sapphire crystal, the earlier 16753 had the plastic crystal).
http://www.ebay.co.uk/itm/New-Genuine-Rolex-Gold-S...
PhyDjKBQ8inRtQs!~~60_12.JPG)
If that's over budget, you could always fit a steel bracelet, which would match a steel and gold case. There's a steel Jubilee at £150 for sale here. It'll need new end pieces which any AD can supply/fit.
http://www.ebay.co.uk/itm/ROLEX-MENS-JUBILEE-STAIN...
KB!GT!~~60_12.JPG)
Food for thought...
As suggested, a new bracelet could well be towards £2000 or more (not certain, haven't checked in years). There's a mint example on ebay that would be the correct variant for the 16713(which has a sapphire crystal, the earlier 16753 had the plastic crystal).
http://www.ebay.co.uk/itm/New-Genuine-Rolex-Gold-S...
If that's over budget, you could always fit a steel bracelet, which would match a steel and gold case. There's a steel Jubilee at £150 for sale here. It'll need new end pieces which any AD can supply/fit.
http://www.ebay.co.uk/itm/ROLEX-MENS-JUBILEE-STAIN...
Food for thought...
Gassing Station | Watches | Top of Page | What's New | My Stuff



