Can anyone help me with my clock, please
Discussion
Hello
We received this as a wedding present from a relative while living in Sydney approx 20 years ago. It never kept particularly good time but since we returned to the UK about seven years ago it only runs for a few minutes before stopping.
It has a certain sentimental value so i would like to get it repaired but wouldn't know where to start. Can anyone recommend anyone who may be able to help? We live in Kent, if that is relevant. I have no idea of the clock's value, nor do i know anything of its history so any information, or pointers as to where i may find some, would be very welcome.
Thanks in advance,
Andrew
We received this as a wedding present from a relative while living in Sydney approx 20 years ago. It never kept particularly good time but since we returned to the UK about seven years ago it only runs for a few minutes before stopping.
It has a certain sentimental value so i would like to get it repaired but wouldn't know where to start. Can anyone recommend anyone who may be able to help? We live in Kent, if that is relevant. I have no idea of the clock's value, nor do i know anything of its history so any information, or pointers as to where i may find some, would be very welcome.
Thanks in advance,
Andrew
I thought it might be by Archibald Knox, who designed a lot of objects for Liberty under the Tudric (pewter) and Cymric (gold and silver) ranges, but I cannot see that particular clock design pictured in my reference book on Knox amnongst the 30 or so others. As others have suggested, I would still go with Liberty as a starting point though.
Looks like a late French "drum" movement, maybe a German copy.
Have you tried putting it in beat? Set the pendulum swinging, and listen to the tick. It should be a nice, even tick tock tick tock.
Lift one side of the clock off the table, and see if the tick gets more or less even.
If it's out of beat, it won't run for long.
French clocks are generally put in beat by slackening the 2 screws that hold the back door in place, and rotating the whole movement/dial/back door assembly.
It's a nice-looking clock, and worth saving. Shouldn't cost more that £75 to have it properly serviced.
Have you tried putting it in beat? Set the pendulum swinging, and listen to the tick. It should be a nice, even tick tock tick tock.
Lift one side of the clock off the table, and see if the tick gets more or less even.
If it's out of beat, it won't run for long.
French clocks are generally put in beat by slackening the 2 screws that hold the back door in place, and rotating the whole movement/dial/back door assembly.
It's a nice-looking clock, and worth saving. Shouldn't cost more that £75 to have it properly serviced.
Gassing Station | Watches | Top of Page | What's New | My Stuff



